Section 700 - Operation
Chapter 7. SLT Features
576-50-700
DBS 576HD (USA) issued September 2001
4-13
Set Extension Names
Description
You can assign names to each extension, even if the extension is not a display telephone. When the
extension is called, the name appears on the display. For more information on the digital key
telephone display, see “Display Information” on page 5-39.
Operation
To set extension names using either a large-display or small-display phone:
Action
Result
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See “To enter User Maintenance mode:” on
page 4-3.)
81-
User MAINT
displays
2. At the
81
level, enter
03
.
3. Press the
HOLD
key.
8103-
Extension Name
displays
4. Press the
HOLD
key.
0
:
EXT Number/Name
displays
5. Press the
HOLD
key.
Enter EXT #
displays
6. Dial the extension number.
7. Press the
HOLD
key.
A B C D E F XXX
displays (where
XXX = extension number)
8. Enter the extension name:
• If using a
large-display phone
, press the soft key next
to the desired row of letters. (See Example 1 on page
4-19.)
• If using a
small-display phone
press the appropriate
one-touch key. (See Example 2 on page 4-20.)
Note:
Press the
FLASH
key to clear any existing data.
9. Use the bottom row of FF keys to select a single letter.
• See Example 1. Large-display phone on page 4-19.
• See Example 2. Small-display phone on page 4-20.
Notes:
• Press the
*
key to erase a single entry.
• Press the
#
key to enter a space.
10. Repeat steps 8-9 as many times as necessary to enter the
desired speed dial name.
Note:
Press the
FLASH
key to clear the entire entry.
11. Press the
HOLD
key to store the entry.
Next extension number displays
12. To set additional extension names, press the volume up
and down key or press the
HOLD
key to move to the
desired SSD.
