58
[[DVD/VHS]]
Advanced Operations
[RAM]
[DVD-R]
You can transfer (dubbing) programs recorded on a tape onto a disc
°
with one stroke of the button.
In One-Touch Dubbing, programs are automatically dubbed onto the
disc from the location of playback on the tape.
°
Available discs for transfer (dubbing) from tape are DVD-RAM and
non-finalized DVD-R.
Preparation
≥
Select the unit viewing channel (or the AV input) on the TV.
DVD
≥
Release protection (disc
l
30, cartridge
l
18).
[RAM]
≥
Insert a disc and confirm there is sufficient empty space for
recording on it. (
l
20, 47)
≥
Select the recording mode.
≥
When SAP broadcast program is played back on VHS, the audio
on DVD is recorded according to the settings in “Select MTS” in the
initial settings. (
l
44)
[DVD-R]
VHS
≥
Insert the video cassette containing the program to be copied
(
l
48).
[1]
While both DVD/VHS are stopped,
Press and hold [
“
DVD, DUBBING] for 3 seconds
or more.
On the main unit, press [
“
DVD].
≥
Check if transfer (dubbing) starts properly.
≥
The “DUBBING” indicator on the main unit lights.
≥
Dubbing is automatically completed when the tape reaches its
end or the disc becomes full.
∫
To stop transfer (dubbing) halfway through
Press [
∫
, STOP].
≥
When transfer (dubbing) is completed, a message indicating the
end of transfer (dubbing) appears on the TV screen and then
disappears a few seconds later.
∫
When transfer (dubbing) is started, the following
operations also start automatically
≥
“OSD” on VHS MENU
)
“OFF” (
l
56)
≥
Recording channel indicator on DVD
)
“TP”
≥
Output to TV
)
DVD output
∫
Only the following operations are allowed while
transfer (dubbing)
≥
Stopping transfer (dubbing) by pressing [
∫
, STOP].
Note:
≥
While One Touch Transfer (Dubbing) is activated, a timer recording
cannot be started.
≥
When “DVD/VHS Output” is set to “Manual” (
l
43), or when VHS
output is selected in starting transfer (dubbing), the output is
switched to DVD automatically at the time when transfer (dubbing)
is started.
- When the transfer (dubbing) is already started, you cannot switch
the output manually.
≥
When the transfer (dubbing) is not started or not executed, the
“DUBBING” indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
≥
When a Copy-guarded tape is inserted, a message appears on the
display and the recording stops on the spot.
≥
If a part of the tape recorded in VP mode is dubbed to disc, noises
may appear at the beginning of the dubbed part.
Transfer (Dubbing) from VHS
VHS
DVD
PROG/CHECK
DVD REC
VHS REC REC MODE
ADD/DLT
DUBBING
VHS
DVD
TIME SLIP
CHAPTER
JET REW
STATUS
DISPLAY
DVD ERASE
SKIP/INDEX
SLOW/
SEARCH
REW
FF
PLAY
FUNCTIONS
DIRECT NAVIGATOR
TOP MENU
VHS MENU
POWER
CM SKIP
CANCEL/RESET
VOLUME
CH
INPUT SELECT
AUDIO
TV
TV/VIDEO
DVD/VHS
VHS
DVD
TRACKING/V-LOCK
DVD/VHS POWER
VCR Plus+
OUTPUT
REC MODE
1
;
∫
CH,
W
,
X
µ
, DVD REC
“
DVD
OPEN/CLOSE
TIME SLIP
REC
CH
/
k
1.3
DUBBING
VHS
DVD
DUBBING indicator
∫
One Touch Transfer (Dubbing) (VHS
l
DVD)
∫
Dividing a title to be dubbed
In One-Touch Transfer (Dubbing) from VHS to DVD, the title is
divided by index signal detected and then recorded. You can
search desired titles with Direct Navigator’s Title View (
l
33)
after transfer (dubbing) to DVD.
≥
Titles recorded within 15 minutes (25 minutes in VP mode) of
each other may not be divided properly.
≥
The recording time may become longer than the original title
depending on the number of index signals.
VHS
DVD
PP-Sample.book 58 ページ ２００４年４月８日 木曜日 午後３時４５分
