Advanced Operations
61
You can specify the position to start transfer (dubbing) of the
program recorded on the disc to the tape.
≥
Copy-guarded discs cannot be dubbed. Most discs are copy-
guarded to prevent illegal reproduction and they cannot be
recorded with the following procedure.
Preparation
≥
Select the unit viewing channel (or the AV input) on the TV.
DVD
≥
Insert the disc containing the program to be copied (
l
20).
≥
Check the channel. If “TP” channel is selected, transfer (dubbing)
does not work properly.
- When the “TP” channel is selected on DVD, you cannot select the
“DC” channel.
VHS
≥
Insert a video cassette with an intact erasure prevention tab.
(
l
48)
≥
Confirm that the remaining tape time is sufficient for recording.
(
l
57)
[1]
Press [DVD] and press [
1
, PLAY].
Start playing the disc and find the recording start point.
≥
Select the audio to be played (the audio to be recorded)
beforehand.
[RAM]
≥
When the DVD-R is inserted, you cannot select the audio.
[2]
Press [
;
, PAUSE] at the start point of the
recording.
[3]
Press [VHS].
[4]
Select “DC” channel with [CH,
W
,
X
].
≥
The DVD picture is displayed on the TV.
[5]
Press [
1
, PLAY].
Start playing the video cassette and find the recording start point.
[6]
Press [
;
, PAUSE] at the start point of the
recording, then press [
¥
, VHS REC] to pause.
Put the unit in the recording standby mode.
[7]
Press [REC MODE] to select the recording
mode.
[8]
Press [
;
, PAUSE].
≥
VHS recording and disc play start at the same time.
∫
When transfer (dubbing) is started, the following
operations also start automatically:
≥
“Status Messages” on Display
)
“Off” (
l
45)
≥
Audio output when playing back DVD
)
Stereo (L R)
∫
Only the following operations are allowed while
transfer (dubbing):
≥
Turning the unit off/on
≥
Stopping transfer (dubbing) by pressing [STOP]
Note:
≥
When the transfer (dubbing) is already started, you can switch the
output manually.
∫
Manual Transfer (Dubbing)
To pause or stop Manual Transfer (Dubbing)
You cannot stop or pause on DVD and VHS at the same time
∫
To pause or stop recording
Press [VHS] and press [
;
, PAUSE] or [
∫
, STOP].
∫
To pause or stop play
Press [DVD] and press [
;
, PAUSE] or [
∫
, STOP].
∫
About DC channel
(DC: Dubbing input channel)
≥
DC channel can be recorded only when the VHS input
channel is set to “DC”.
≥
When you play back a tape with the channel set to “DC”, the
DVD picture is displayed on the TV screen.
VHS
DVD
PP-Sample.book 61 ページ ２００４年４月８日 木曜日 午後３時４５分
