67
RQT9272
To change the tuning settings for individual
programme position
Manual Tuning
Pos Channel CH Pos Channel CH
Delete
Add
Move
1 BBC1 4
2 BBC2 2
3 1TV 5
4 CH4 8
5 CH5 10
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
OK
RETURN
SELECT
Pos
Channel
CH
NICAM
1
4
Auto
RETURN : leave
Manual
Tuning
BBC
Title Page
301
RETURN
SELECT
1. Press [
,
,
,
] to select a programme
position, then press [OK].
2. Press [
,
] to select an item, then press [
].
Pos
To change the programme position in which
the TV stations are assigned
Press [
,
] or numbered buttons to select the
number of the desired programme position, then
press [OK].
Channel
To enter or change the Channel of a TV station
Press
[
,
,
,
]
to enter station name, then
press [OK].
If the
Channel
needs a blank space, select the
blank between “Z” and “
”.
CH
To enter newly available TV stations or change
the CH number of an already tuned TV station
Press [
,
] or the numbered buttons to enter the
CH number of the desired TV station.
Wait a few moments until the desired TV station
has been tuned.
After the desired TV station is tuned, press [OK].
NICAM
To select the type of sound to be recorded
Press [
,
] to select “Auto”, then press [OK].
Select “Off” if you want to record the normal
(mono) sound during a stereo, bilingual or
NICAM broadcast, or if the stereo sound is
distorted due to inferior reception conditions.
Title Page
To enter the Teletext title page for a channel
Entering title page number allows the unit to
automatically record programme and channels.
Press [
,
] or numbered buttons to enter the
number, then press [OK].
To
fi
nd the correct title page for the station, refer
to its Teletext TV guide.
The unit’s clock must be set correctly.
Auto-Setup Restart
Download from TV
You can restart auto channel setting if setup ( 13) fails for
some reason.
Select “Download from TV” when you connect the unit to a Q
Link compatible TV with a fully wired 21-pin Scart cable or a
VIERA Link (HDAVI Control 3 or later) compatible TV with a
HDMI cable.
(Programme positions are downloaded from the TV for the
channels in this unit’s channel coverage and copied through
this convenient function.)
When the con
fi
rmation screen appears
Press [
] to select “Yes”, then press [OK].
Notes
If you perform “Auto-Setup Restart”, all stored tuning
data are deleted.
If you perform “Download from TV”, all currently stored
stations will be replaced by new ones.
Tips
You can also use the following method to restart Auto-
Setup. (All the settings except for the ratings level,
ratings password, Owner ID and Clock return to the
factory preset. The timer recording programmes are
also cancelled.)
When the unit is turned on and stopped, press
and hold [CH
] and [CH
] on the main unit
simultaneously for about 5 seconds.
– Auto-Setup screen appears.
You can make the setting of “Title Page” (Auto/Off) by selecting
the external input channel (AV1, AV2, AV3) in step 1 ( above).
Setting Menus
DMR-EH59EM.indb 67
DMR-EH59EM.indb 67
2009/01/09 9:30:23
2009/01/09 9:30:23