57
Picture and sound setting during playback
Setting
Option
Sound
Setting
Option
Other
Position
[1 - 5]
DVB Multi Audio
If more than one audio channel is broadcast, you can set the desired
channel here (only applies to digital channels).
Playback NR
Progressive
Transfer.
[On] [Off]
[On] [Off]
AV-in NR
[Automatic]
[On]
[Off]
Setting
Option
Picture
Title Chapter Off
Track All Off
CD VCD
RAM -R
+R
-RW(V)
-RW(VR)
DVD-V
+R DL
-R DL
+RW
Track Group Off
PL (Playlists) Off
DVD-A MP3
RAM -RW(VR)
Repeat Play
[On] [Off]
Setting
Option
Play
The function is only available if the elapsed time is displayed.
PAL output signal
NTSC output signal
Reduces screen interference.
Select [On] to activate full picture output.
[Progressive - On]
Select the appropriate conversion method for full-picture output.
[Auto] Film and video content is detected and converted appropriately.
[Video] If problems occur with the [Auto] setting.
[Film] Select Video or Film if the video content is is not displayed correct
with the Auto setting.
During playback of a playlist
If the Video-CD has playback control, select a track in
STOP
mode
with the number buttons.
[Auto 1] Film and video content is detected and converted appropriately.
[Auto 2] Movies with different picture frequencies are converted
[Video]
If content does not display correct with the [Auto 1] or [Auto 2]
settings.
Reduces noise during tape recording. Only for AV1, AV2, AV3 or DV.
Only with picture input from a video cassette.
Noise reduction is activated for video input.
The input signal can be recorded unchanged.
RAM -R
-RW(V) +R
-R DL
-RW(VR)
+R DL +RW DVD-A DVD-V
Dialog Enhancer
[Natural]
[Emphasis]
[Off]
[On] [Off]
V.S.S.
RAM -R
-RW(V) +R
-R DL
-RW(VR)
+R DL +RW DVD-A DVD-V
Surround sound effect with 2 front speakers. Only with Dolby Digital with
2 or more channels. Switch off V.S.S. if this causes problems. V.S.S. does
not work with recordings in dual-channel sound.
Dolby Digital, only with 3 or more channels, including a center channel.
The volume is increased so that dialogue is easier to understand.
Position of the OSD displays on the screen.
[Other 1]
[Other 2]