65
VQT2J39
S
e
tt
ing m
e
nus
§
1
The timer recording programmes are also cancelled.
§
2
Recording on the HDD will not be deleted.
Standby Settings
≥
Press [OK] to show the following settings.
Power Save in Standby
[On]
It will go into the Power Save in Standby mode
when the unit is in standby mode.
[Off]
It is possible to start quickly from the standby
mode. (Quick Start mode)
[On Timer]
“Power Save in Standby” is set to activate
during the setting time period. (
>
below)
1
Press [
3
,
4
] to select “On Timer” and press [OK].
2
Press [
3
,
4
] to set the start time (hour).
3
Press [
2
,
1
] to select the stop time and press [
3
,
4
] to
set the stop time (hour).
4
Press [OK] when you have finished the settings.
≥
You can also use the numbered buttons for setting.
≥
You can set start and stop time by the hour.
≥
If the clock has not been set, “Power Save in Standby” is
activated at all hours.
Auto Standby
Set the time to automatically turn the unit off.
After the unit has finished operating, the unit will be turned off
once the set time has passed.
[30 minutes]
[1 hour]
[2 hours]
[4 hours]
[6 hours]
[Off]
The unit will not automatically turn off.
Auto Standby after OTR
[On]
This unit is turned to standby mode when this unit is not
operated for approximately 5 minutes after completing
One Touch Recording (
>
18).
[Off]
Auto Standby after Copy
[On]
This unit is turned to standby mode when this unit is not
operated for approximately 5 minutes after completing
copy (
>
45-53).
[Off]
RF OUT ( Aerial Signal )
[On]
Broadcast signals are output from this unit.
TV can receive broadcast signals even if this unit is in
standby mode when connecting TV with this unit using
the RF cable (
>
67).
[Off]
Press [
2
,
1
] to select “Yes” when the confirmation
message is displayed.
Broadcast signals are not output from this unit to reduce
standby power consumption.
≥
Power consumption is lowered additionally when
“Power Save in Standby” is activated.
≥
If this unit turns into standby mode when connecting TV
with this unit using the RF cable, proper broadcast
images do not appear on TV.
DivX Registration
You need this registration code to purchase and play DivX Video-
on-Demand (VOD) content (
>
29).
Power Save in Standby
Power Save
On Timer
To
6 :00
From
0
:00
Saves standby power consumption
by disabling Quick Start function and
AV2 loop-through in standby. Unit's Display
is set to "Automatic".
Press OK to manually set the period of
Power Save.
0 9
Number
OK
RETURN
SELECT
CHANGE
System Update
In order to update this unit’s software and to support system
changes made by broadcasts, this unit periodically performs
software updates.
Press [OK] to show the following settings.
≥
Update data is sent by an unscheduled digital broadcast. In order
to receive these updates, you must be able to receive digital
broadcasts.
≥
An update will take approximately 60 minutes. While the update
is in progress, “SW-DL” appears on the unit’s display. You cannot
operate the unit until the update is complete. Removing the AC
mains lead while the update is in progress may damage the unit.
Software Update in Standby
[On]
When you set this unit to standby mode, software
updates are downloaded automatically.
[Off]
Software Search Period
Selects the time to automatically perform updates when the unit
is set to standby mode. This can only be set when “Software
Update in Standby” is set to “On”.
≥
If there is a programmed recording set for the time you have
selected, the programmed recording will be given priority.
[Automatic]
§
[02:00–06:00]
[06:00–10:00]
[10:00–14:00]
[14:00–18:00]
[18:00–22:00]
[22:00–02:00]
§
The unit will give priority to searching for update data at
midnight.
Software Update Search Now
Start the search for new software manually.
A new software version is announced by a message. Do not turn
your unit off during the update. This could result in the loss of
data. A message shows that the update has finished.
≥
If applicable update data is found, press [
2
,
1
] to select “Yes”
and press [OK].
Initialize
≥
Press [OK] to show the following settings.
Shipping Condition
§
1,
§
2
All the settings except for the language settings, ratings level,
ratings PIN, Slideshow Settings, and clock settings, etc. return to
the factory preset.
[Yes]
[No]
Default Settings
§
1,
§
2
All the settings other than the tuning settings, clock settings,
country settings, language settings, disc language settings,
ratings level, ratings PIN, remote control code, etc. return to the
factory presets.
[Yes]
[No]
DMREX773EC-VQT2J39_eng.book 65 ページ 2010年1月14日 木曜日 午後1時31分