15
RQT9414
Qui
c
k
S
ta
rt
Gu
ide
Media handling (Disc/USB memory/SD card)
≥
Instructions/notes regarding SD cards and SD drive are applicable to the DMR-EX89 model only.
1
Press [
<
OPEN/CLOSE] to open the tray.
2
Press [
<
OPEN/CLOSE] to close the tray.
Automatic drive select function
[RAM]
[Only for discs with the write-protect tab on the cartridge set to
“PROTECT” (
>
60, Cartridge-protection and Card-protection)]
[DVD-V]
[VCD]
≥
If the unit is recording to the HDD or stopped, it automatically
switches to the DVD drive when a disc is inserted.
≥
If you eject a disc and close the disc tray, the HDD drive is
automatically selected.
≥
When using 8 cm DVD-RAM, or 8 cm DVD-R, remove the disc
from the cartridge.
≥
[RAM]
It is not possible to record or play continuously from one side
of a double sided disc to the other. You will need to eject the disc
and turn it over.
≥
[RAM]
When using cartridge discs with the write-protect tab in the
protect position (
>
60), play automatically starts when inserted in
the unit.
Inserting the USB memory
≥
Before inserting any USB memory to this
unit, ensure that the data stored therein
has been backed up.
≥
Check the orientation of the USB
connector and insert it straight in.
≥
Insert an USB device while the unit is
stopped, so the “USB device” screen is
displayed. Select an item and press [OK]
to switch to the USB-related operations (
>
34, 55).
Removing the USB memory
≥
Complete all USB-related operations and pull the USB memory
straight out.
≥
If a USB memory being accessed is pulled out, then the data may
be damaged.
When the SD card slot indicator (“SD”) on the unit’s display is
flashing, the card is being read from or written to. Do not turn off the
unit or remove the card. Such action may result in malfunction or
loss of the card’s contents.
≥
Inserting foreign objects can cause a malfunction.
Inserting the card
Removing the card
∫
How to hold a disc or a card
Do not touch the recorded surface or the terminal surface.
∫
Concerning non-cartridge discs
Be careful about scratches and dirt.
∫
If there is dirt or condensation on the disc
Wipe with a damp cloth and then wipe dry.
∫
Handling precautions
≥
Do not attach labels or stickers to discs. (This may cause disc
warping and un-balanced rotation, rendering it unusable.)
≥
Write on the label side of the disc only with a soft, oil-based felt
pen. Do not use ballpoint pens or other hard writing implements.
≥
Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥
Do not use scratch-proof protectors or covers.
≥
Do not expose the terminals of the card to water, garbage or other
strange things.
≥
Do not drop stack, or impact discs. Do not place objects on them.
≥
Do not use the following discs:
– Discs with exposed adhesive from removed stickers or labels
(rental discs, etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart
shapes.
≥
Do not place in the following areas:
– In direct sunlight.
– In very dusty or humid areas.
– Near a heater.
– Locations susceptible to significant difference in temperature
(condensation can occur).
– Where static electricity or electromagnetic waves occur.
≥
To protect discs from scratches and dirt, return them to their cases
or cartridges when you are not using them.
Inserting discs
Inserting, removing the USB memory
Inserting, removing the SD card
[EX89]
Insert label-up with the
arrow facing in.
Insert fully.
Insert label-up.
∫
Cartridge disc
Note
ADAPTER
If you are using a
miniSD card, a
miniSDHC card, a
microSD card or a
microSDHC card,
insert it into the
adaptor that comes
with the card.
Insert and remove
this adaptor from the
unit.
Press on the centre of the
card until it clicks into
place.
Insert the card label up with
the cut-off corner on the right.
e.g., miniSD
Press on the centre of the card.
Pull it straight out.
Disc and card care
The manufacturer accepts no responsibility and offers no
compensation for loss of recorded or edited material due to a
problem with the unit or recordable media, and accepts no
responsibility and offers no compensation for any
subsequent damage caused by such loss.
Examples of causes of such losses are
≥
A disc recorded and edited with this unit is played in a DVD
Recorder or computer disc drive manufactured by another
company.
≥
A disc used as described above and then played again in this
unit.
≥
A disc recorded and edited with a DVD Recorder or computer
disc drive manufactured by another company is played in this
unit.
DO
DO NOT
DO
DO NOT
DO NOT
DMREX79&89EC-RQT9414-L_eng.book 15 ページ 2009年5月14日 木曜日 午前9時23分