93
RQT9299
Reference
Cannot record.
Cannot copy.
You haven’t inserted a disc or the disc you inserted cannot be recorded
on. Insert a disc the unit can record onto.
15
[RAM]
[-RW‹V›]
[+R] [+R]DL] [+RW]
The disc is unformatted. Format the disc.
68
The write-protect tab on the cartridge is set to “PROTECT” or the disc is
protected with the “DVD Management” settings.
68
Some programmes have limitations on the number of times they can be
recorded (CPRM).
24, 96
The disc is full or nearly full. Delete unneeded titles (
[HDD] [RAM]
[-RW‹V›] [+RW]
) or use another disc.
23, 48,
68
You cannot directly record to a DVD-R DL or +R DL disc on this unit.
Record to the HDD and then copy to the disc.
−
Video cannot be recorded onto a DVD-R with still images recorded on it.
−
[-R]DL]
[+R]DL]
In the following situations, you cannot copy. Delete
unnecessary titles from the HDD and then copy.
– If there is not enough space available on the HDD (If you will copy titles
from the HDD to a blank disc and
fi
ll the entire disc, HDD disc space
equivalent to 4 hours of SP mode recording is necessary).
– If the number of recorded titles and the number of titles to be copied has
exceeded 499.
23, 48,
68
You cannot record and copy on finalised DVD-R, DVD-R DL, DVD-RW
(DVD-Video format), +R, +R DL discs. However, you can record and copy
again if you format DVD-RW.
−
If you repeatedly insert discs or turn the unit on and off about 50 times
or more, the recording or editing of DVD-R, DVD-R DL, DVD-RW (DVD-
Video format), +R, +R DL, and +RW discs may be disabled.
−
DVD-R, DVD-R DL, DVD-RW (DVD-Video format), +R, +R DL and +RW
discs recorded on this unit may not be recordable on other Panasonic
DVD Recorders.
−
This unit cannot record NTSC signals to discs that already have PAL
signal recordings.
(However, both types of programmes can be recorded onto the HDD.)
Play of discs recorded with both PAL and NTSC on another unit is not
guaranteed.
75
Some broadcasts are copyright protected.
15, 24,
96
Timer recording does not work
properly.
The timer programme is incorrect or different timer programme times
overlap. Correct the programme.
31
The programme is not in timer recording standby. (“
” in the timer
recording list is not on.)
31
1 Press [PROG/CHECK].
2 Press [
,
] to select the programme and press the “Red” button.
The clock is not correct. Set the clock.
14
The programme information in the GUIDE Plus+ system may not be
correct. It is recommended to modify the start and end times to allow a
margin of a few minutes.
22
(Continued on the next page)
Recording Issues
Recording/Timer Recording/Copying/External input
Page
Playback Issues
Operation (Continued)
Page
The Video CD picture does not
display properly.
When connecting to Multi-system TV, select “NTSC” in “TV System” in the
Setup menu.
75
When connecting to PAL TV, the lower part of the picture cannot be
displayed correctly during search.
−
Time Slip, Manual Skip, etc. does
not work.
These functions do not work with finalised discs.
−
Time Slip does not work when the unit’s “TV System” settings are different
from the title recorded on the disc.
75
It takes time before play starts.
This is normal on DivX video. (DivX)
−
Picture stops.
Picture may stop if the DivX
fi
les are greater than 2 GB. (DivX)
−
Cannot see the beginning of the
title played.
(If connecting to a TV that supports VIERA Link with an HDMI cable)
When [
] (PLAY) is pressed on this unit’s remote control, you may not be
able to see the beginning of the title played until the picture is displayed on
the TV. Using [
], return to the beginning of the title.
−
DMR-EX79EB.indb 93
DMR-EX79EB.indb 93
2009/01/14 14:53:13
2009/01/14 14:53:13
