46
Timer programming with the television set
The title overlaps with other recordings.
HDD/DVD was full. The title could not be recorded.
The programme cannot be played back due to damaged data
or cannot be recorded for another reason.
The title is write protected.
The programme was copy protected, the title was not recorded.
The title was transferred from DVD to HDD.
Title with restriction for one-time copying.
The title is automatically renewed.
W
F
The title is currently being recorded.
Shows a Timer programming.
A daily or weekly Timer Recording was stopped.
The symbol disappears as soon as the next recording starts.
Titles and playlists which can be copied to DVD-R etc.
in High Speed mode.
The title is intended for one-time copying and will be deleted
after copying.
Titles or playlists with still pictures cannot be overwritten.
Titles and playlists which can be copied to DVD-R etc. in High Speed
mode but not to +R, +R DL, and +RW.
PAL
The title or playlist was recorded with a TV system other than that
currently set for the unit. Titles and playlists with these markings
possibly cannot be played back.
Switch your TV system to playback these titles/playlists.
NTSC
Symbols
If your television set is equipped with the Q Link function and the possibility of
programming with Timer Recording, then you can programme the Timer Recording
on your television set.
!
Connect the DVD Recorder to the television set with a fully wired
!
Press
DRIVE SELECT
on the DVD Recorder to select the drive.
!
Switch the DVD Recorder to Standby mode.
The television set controls the start and end of the recording.
!
Press
STOP
to stop the recording.
The recording does not start if the DVD Recorder is in Timer or
tandby.
If several Timer Recordings follow on in quick succession, they are recorded as one
title.
21-pin Scart cable.
EXT LINK s
Editing several elements.