77
No picture, picture interference.
!
Press and hold
STOP
and
x1.3
on the unit at the same time for longer
than 5 seconds. The function switches to half picture (Interlace).
The TV picture is distorted at the
side. Black bars at top and bottom.
î
Change the TV screen aspect.
Menu Setup - Connection - TV Aspect
64
No on-screen messages.
î
Switch the on-screen messages on.
Menu Setup - Display - On-Screen Messages - [On].
63
No sound, distorted sound.
î
Check the connections.
16
î
If you have connected an amplifier, check the input mode.
î
Switch the V.S.S. function off if it causes problems.
Press
DISPLAY
- Sound - V.S.S. - [Off]
71
It is not possible to hear the
required language.
î
Check the connection to the TV, e.g. AV1.
10
î
The Progressive output is activated, but the connected TV is not
Progressive-capable.
64
î
Change the settings for the screen aspect of your TV.
Menu Setup - Connection - TV Aspect
64
î
The [TV System] setting does not match that on the disc.
64
!
In
STOP
mode, press and hold
STOP
and
OPEN/CLOSE
on the unit
for more than 5 seconds.
This switches the unit from PAL to NTSC or vice versa.
î
Adjust the time.
Menu Setup - Others - Clock
66
The display light is too weak
No time
"0:00" flashes on the display.
PICTURE
SOUND
DISPLAY
î
The sound is not played back if the bitstream signal is being emitted by
HDMI AV OUT or OPTICAL DIGITAL AUDIO OUT.
î
Programmes with 5.1 Surround Sound can only be played back in dual
channel sound.
The picture sometimes appears
double when connected to
COMPONENT VIDEO OUT.
î
Do not connect the DVD Recorder to the television with a HDMI cable.
î
Change the setting for Progressive.
Menu Setup - Connection - Progressive - [Off]
64
"SLEEP" appears on the
display.
No functions.
î
An incorrect remote control code has been selected.
Menu Setup - Others - Remote Control
66
î
Point the remote control at the sensor on the unit.
î
The child lock feature is activated.
6
î
Check the batteries.
5
The TV cannot be operated.
î
Change the code of the remote control.
6
REMOTE CONTROL
!
Press
AUDIO
or
DISPLAY
during playback, depending on the disc format
.
26
î
For programmes in dual channel sound:
Menu Setup - Sound - Bilingual Audio Selection
63
î
Select the required language in the disc menu before playback.
The language cannot be switched on some discs.
It is not possible to hear the
required audio channel.
î
Adjust the brightness of the unit display.
Menu Setup - Display - FL Display
63
î
If no function has been selected for more than 30 minutes and no disc is
inserted in the drive, then "
" appears on the unit display.
SLEEP
î
For programmes in Multi Audio, only the available languages can be selected.
DISPLAY
- Sound - DVB Multi-Audio
71
If you need help