72
VQT4W64
Other Settings
You can configure the remote control TV operation buttons to turn
the television on/off, change the television input mode, select the
television channel and change the television volume.
1
Point the remote control at the
television
While pressing [
Í
TV], enter the code
with the numbered buttons.
2
Test by turning on the television and
changing channels.
≥
Repeat the procedure until you find the code that allows
correct operation.
≥
If your television brand is not listed or if the code listed for
your television does not allow control of your television, this
remote control is not compatible with your television.
≥
If your television brand has more than one code listed, select the
one that allows correct operation.
Manufacturer and Code No.
The HOLD function deactivates all buttons on the unit and remote
control. Use it to prevent other people from operating the unit.
Press and hold [OK] and
[RETURN ]
simultaneously until “X
HOLD” appears on the unit’s display.
If you press a button while the HOLD function is on, “X HOLD”
appears on the unit’s display and operation is impossible.
To cancel the HOLD function
Press and hold [OK] and [RETURN ] simultaneously until “X
HOLD” disappears.
Software of CAM (compatible CI Plus) can be upgraded
automatically from broadcasts.
Availability of software upgrade is detected while viewing the
programmes compatible with CI Plus.
When notification is displayed on the screen, select “Yes” and
press [OK].
≥
Notice is not displayed in the following cases:
– When recording a programme
– When timer recording and CAM software upgrade occur
simultaneously
– When displaying FUNCTION MENU, DIRECT NAVIGATOR, etc.
≥
“CAM-UP” is displayed on the unit’s display during upgrading.
It is also displayed on the Digital Channel Information (
>
17) when
the CAM software can be upgraded immediately.
To execute CAM software upgrade, push the “Red” button while the
digital channel information is displayed, and follow the instructions
on the screen.
≥
Operations such as view, playback, or record cannot be performed
while upgrading the CAM.
Any buttons on the remote control or the unit cannot be used while
upgrading the CAM.
≥
If the timer recording is started, CAM software upgrade is
cancelled to start recording.
≥
For details, refer to your CAM’s operating instructions or consult
your dealer.
Television operation
e.g.,
01:
[0]
>
[1]
10:
[1]
>
[0]
6
5
4
3
2
1
CH
CH
PAGE
VOL
AV
DRIVE
SELECT
Í
TV
Í
CH
VOL
AV
Í
Turn TV on/off
Input select
Volume
Channel Select
Note
AIWA
35
MITSUBISHI
05/19/20/47
BEJING
33
NEC
36
BENQ
58/59
NOKIA
25/26/27/60/61
BRANDT
10/15
OLEVIA
45
CENTREX
66
ORION
05
CURTIS
05
PHILCO
41/48/64
DESMET
05
PHONOLA
05
ELEMIS
05
PROVIEW
52
FINLUX
61
RADIOLA
05
FUJITSU
53
SALORA
26
GOLDSTAR
05/50/51
SANSUI
05
GRADIENTE
36
SCHNEIDER
05/29/30
HIKONA
52
SELECO
05/25
INNO HIT
05
SIEMENS
09
ITT
25
SONY
08
JVC
17/30/39/70
TELEFUNKEN
10/11/12/13/14
KOLIN
45
TEX ONDA
52
LG
05/50/51
TOSHIBA
16/57
MAG
52
YAMAHA
18/41
Brand
Code
Brand
Code
05
LOEWE
WHITE
WESTINGHOUSE
07/46
Panasonic
01/02/03/04
METZ
05/28/79
AKAI
27/30
MIVAR
24
BEKO
05/71/72/73/74 NOBLEX
33
BP
09
NORDMENDE
10
BUSH
05
ONWA
30/39/70
CHANGHONG
69
PEONY
49/69
DAEWOO
64/65
PHILIPS
05/06/46
DUAL
05
PIONEER
37/38
FERGUSON
10/34
PYE
05
FUNAI
32/42/43/65/68
63/67
SAMSUNG
FISHER
21
SABA
10
GOODMANS
05
SANYO
21/54/55/56
GRUNDIG
05/69/75/76/77/78
09
SEG
IRRADIO
30
SINUDYNE
05
JINGXING
31/33/66/67/69
49
TCL
KDS
52
TEVION
52
KONKA
62
THOMSON
10/15/44
HITACHI
05/22/23/40/41 SHARP
18
HOLD function
CI Plus compatible CAM (Conditional
Access Module) software upgrade
1 Das Erste
All Channels
18:53
Change Category
CAM Upgrade Info
ZDF-Mor
19:00 - 19:30
NO
W
TXT
Note
DMREX96C-VQTXXXX_eng.book 72 ページ 2013年3月5日 火曜日 午後5時51分