11
If you receive your television programme via a satellite receiver (digital/analogue),
connect your DVD Recorder as shown in connection type B.
View / record satellite programmes
Press
INPUT SELECT
to select the input channel AV2 or put this unit in
standby mode.
To record satellite programmes refer to “Timer Recording from Sat
with VIDEO Plus+".
22
If your television supports Q Link, use a fully wired 21-pin Scart cable to connect
it to the TV.
The analogue stations automatically downloaded through [Download from TV].
If your television supports RGB, set the AV1 Output to RGB 1 or RGB 2 in the
Setup menu.
44
[Auto-Setup] follows automatically and if it ends with the note: [No stations found !].
!
Select [No] with and confirm with
ENTER
.
!
You can complete the Owner ID now. To skip this step and do it later,
press the
RETURN
button.
The date and time are not set automatically. Set them manually.
47
An incorrect date or time affects the programmed recording of television
programmes (note summer and winter time).
46
Yes
No
Auto-Setup
No stations found !
Please check aerial connection
Restart Auto-Setup
SELECT
RETURN
ENTER
The TV Guide does not show any information if you have connected
the unit to a satellite receiver only.
Connecting to a television and Satellite receiver
B
After completing the above connections, proceed to the Auto-Setup.
9
Your DVD Recorder is now ready to use.
!
Switch the DVD Recorder to AV2 with
CH
.
You see the television picture from the external unit.
1
2
3
4
5
6
Connect the aerial to the RF IN (aerial input) of the external unit.
household mains socket.
Connect the RF OUT (aerial output) of the external unit with the RF IN
(aerial input) of the DVD Recorder.
Connect the RF OUT (aerial output) of the DVD Recorder with the RF
IN (aerial input) of the television unit.
Connect the AV1 terminal (21-pin Scart terminal) of the DVD Recorder
with the Scart input of the television unit.
Connect the external unit with a 21-pin Scart cable to the AV2 terminal
of the DVD Recorder.
Connect the DVD Recorder, the TV and the external unit to the
Auto-Setup with connected Satellite Receiver and aerial
Auto-Setup with connected Satellite Receiver
Switch on the external unit and DVD Recorder.
Turn on the television and select the AV input that this unit is connected to.
Auto-Setup