1
Firmware History
1.1
Applicable Models
DMR-EZ27
Includes models with suffix K or S
1.2
Purpose
U8-225
•
Improved playback DVD+R media which was recorded by SONY DVD Recorder.
•
Optimization of track jump control for CD-RW.
•
Improvement of recording quality for DVD-R DL.
U8-217
•
Enhances Closed Captioning display.
•
Enables the unit to the download the New V-Chip/Regional Rating Table (RRT).
U8-201
•
ATSC level meter indication improvement with weak signal.
•
Stops disc rotation when the [EJECT] button is pressed.
U8-196
•
Countermeasure for occurred aging mode by remote control signal.
•
Protection for Drive unit fuse blowing due to customer Disc condition.
•
Upgrade program for next generation drive.
U8-190
•
When recording program of 5.1 ch Audio, the center channel audio is not output.
•
The title information of the recorded program is not displayed correctly.
U8-184
•
Hang-up sometimes occurs using JPEG of RAM disc on "Direct Navigator".
•
"Copying has been stopped" message is displayed on the "Status".
•
"oooooo" is indicated continuously on power off after malfunction occurs.
•
DVD-Video is played back on indication of "oooooo" after power off using EZ-Sync.
DMR-EZ27 DVD Recorder Firmware Installation Instructions
Page 2 of 8
