24
RQT8856
Manual timer recordings
Preparation:
• Turn on the television and select the appropriate
video input to suit the connections to this unit.
•
RAM
If the disc is protected, release protection
(
➔
44).
• Insert a disc with enough remaining blank space.
• Confirm that the clock on the unit’s display is set to
the correct time.
• If connected via a satellite receiver, set channel
there before timer recording starts.
Drive
space
No. Name
Date Start Stop Mode STTL
Press OK to store new programme.
Timer
Recording
OK
RETURN
Remain 1:54 SP
14:15:16 6/ 3 MON
NewTimer Programme
e
,
r
to select “New Timer
Programme” then
w
,
q
to move through the items
and
e
,
r
to set the items.
All services : -----
Timer
Recording
OK
RETURN
Change
Profile
Name
Date
Start
Stop
Mode STTL
--/-- -- --:-- --:--
--
SP
Programme Name
Remain 1:54 SP
14:15:16 6/ 3 MON
Number
0
9
Please set Channel.
---
Name:
TV Station Name/External Input
When recording satellite
programmes, select “AV2”.
You can press the “Blue” button to
change the category.
[e.g., Free TV, Radio, Registered
Profiles (
➔
46)]
–
•
•
Date:
You can set a daily or weekly
programme (
➔
Tips).
–
Start (start time) / Stop (end time):
Hold button to change in 30-minute
increments or decrements.
–
Mode:
Recording mode (
➔
18)
–
STTL [Subtitles (
➔
32)]:
ON/OFF
–
Programme Name:
Press [OK], see page 36.
The timer icon is displayed in left column.
Name
No.
7/
7/
BBC1
01
g
“
z
” lights on the unit’s display to indicate
timer recording standby has been activated.
Repeat steps
2
−
4
to programme other
recordings.
Press [
8
] to turn the unit off.
–
–
–
–
Notes
“
z
” on the unit’s display flashes when the unit cannot go to timer
recording standby. (e.g., a recordable disc is not in the disc tray).
When timer recordings are set to start one immediately after
another, the unit cannot record the beginning of the later
programme.
If two timer recording times overlap, the first recording always has
priority. The second recording will start only after the first recording
has finished.
Recorded subtitles cannot be deleted later.
Timer Recording does not start while a disc is being formatted,
deleted or finalised. The recording begins afterwards.
When “Name” is set in AV1, AV2 or AV3, STTL setting is
unavailable.
Tips
To exit the timer recording list
Press [PROG/CHECK].
“Date” Setting
Each press of [
e
] changes items in the order below.
(Each press of [
r
] changes items in the reverse order.)
Daily timer
Weekly timer
One month later
minus one day
Current date
SAT
---
---
SUN
SUN-SAT
MON-SAT
MON-FRI
You can also use the numbered buttons to enter “Name”, “Date”,
“Start”, and “Stop”.
You can also press [REC MODE] to switch “Mode” and press
[STTL ] to switch “STTL”.
To cancel a timer recording in progress
While the unit is on
Confirmation screen appears.
–
w
to select “Stop Recording” then
Notes
Recording stops and the timer programme is deleted. (Daily and
weekly timer programmes remain and timer recording will start as
programmed.)
•
•
•
•
•
•
•
•
•
•
Advanced Timer Recording
RQT8856-B̲DTP̲070306.indb 24
RQT8856-B̲DTP̲070306.indb 24
2007/04/04 17:48:42
2007/04/04 17:48:42
