65
RQT9056
Functions of HDMI
Perform steps 1−3 of “Accessing the Setup Menu” (
55).
,
to select “TV Screen”, then
,
to select “Functions of
HDMI”, then
OK
HDMI Priority
After selecting “Functions of HDMI” (
abo
v
e, step 5).
,
to select “HDMI Priority”,
then
OK
,
to select “On” or “Off”, then
OK
[Off]
W
hen connecting e
q
uipment such as an amplifi er with
an HDMI cable and connecting TV (compatible with
progressi
v
e
v
ideo) with a Component Video Cable
HDMI Resolution
After selecting “Functions of HDMI” (
abo
v
e, step 5).
,
to select “HDMI
Resolution”, then
OK
,
to select the item, then
OK
[Auto]
Automatically selects the output resolution best suited
to the connected tele
v
ision (1080p, 1080i, 720p or
480p).
[480i]
[480p]
[720p]
[1080i]
[1080p]
W
hen setting
v
ideo output to “1080p”, we
recommend using a Panasonic HIGH SPEED
HDMI cable to pre
v
ent
v
ideo distortion.
You can only select items compatible with the connected
e
q
uipment. This setting normally does not need to be changed.
Howe
v
er if you are concerned about output picture
q
uality, it
may be impro
v
ed by changing the setting.
To enjoy High Quality Video up-con
v
erted to 1080p, you need
to connect the unit directly to a 1080p–compatible HDTV. If this
unit is connected to an HDTV through other e
q
uipment, it must
also be 1080p compatible.
24p Output for DVD-Video
,
to select “24p Output for
DVD-Video”, then
OK
W
hen this unit is connected to a TV supporting 1080/24p output
v
ia an HDMI cable, this unit displays each frame at 1/24 second
inter
v
als – the same inter
v
al originally shot with the fi lm camera.
After selecting “Functions of HDMI” (
left, step 5).
,
to select “On” or “Off”, then
OK
[On]
Set to “On” and then set the Progressi
v
e/24p in the
Video Menu in the On-screen Menu (
51) to “24p”.
W
hen the
v
ideo is being output in 24 frames per
second, no
v
ideo is output from a
v
ideo terminal other
than the HDMI terminal.
HDMI Output Display Aspect
,
to select “HDMI Output
Display Aspect”, then
OK
Settings used when 4:3 aspect
v
ideo is output on the tele
v
ision
as 16:9 aspect.
After selecting “Functions of HDMI” (
left, step 5).
,
to select “Full” or “Normal”,
then
OK
[Full]
Video output is enlarged to match the screen size.
[Normal]
Video is output as 4:3 aspect. Side panels (black
bars on the left and right) will appear on the
screen.
Notes
Depending on the e
q
uipment to connect, some items may
be shaded in gray on the display and cannot be selected, or
changing settings may be una
v
ailable.
Abo
v
e items can be set when you set “HDMI Priority” to “On”.
Setting Men
us
DMR-EZ48VP.indb 65
DMR-EZ48VP.indb 65
2007/12/13 20:44:10
2007/12/13 20:44:10
