Troubleshooting
VQT4W79
88
Troubleshooting guide
If there is any problem, the following message is
displayed on the screen.
When you experience problems with
Easy Network Setting
Wireless Settings
Display
Check the following
A conflict with
other devices
occurred.
• Please wait a few moments,
and then try again.
A time out error
occurred.
• Setting of the Wireless router
for MAC Address etc.
• The signal may be weak.
[HWT130]
Using the USB
extension cable supplied with
the Wireless LAN Adaptor,
adjust the position of the
Wireless LAN Adaptor.
• The SSID and the encryption
key of the Wireless router.
• Please wait a few moments,
and then try again.
An
authentication
error or a time
out error
occurred.
A device error
occurred.
•
[HWT130]
Connection of
Wireless LAN Adaptor
• If the problem is not solved,
consult your dealer.
Easy Network Setting ( Home Network
Connection Check )
Display
Check the
following
1. LAN cable
connection or
Wireless setting:
“Fail”
• Connection
of the LAN
cables
(
>
15)
• Settings of
the hub and
router
2. IP address
setting:
“Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
• Connection
and settings
of the hub
and router
• Settings of
“IP Address /
DNS
Settings”
(
>
66, 74)
2. IP address
setting:
“Fail”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
2. IP address
setting:
“Pass”
3. Connection to
gateway:
“Fail”
1. LAN cable
connection or
Wireless setting:
“Pass”
2. IP address
setting:
“Home
network
available”
3. Connection to
gateway:
“Fail”
DMR-HWT230EB_eng.book 88 ページ ２０１３年４月１１日 木曜日 午後３時９分
