17
Before Using
• “1 h 40 min.” indicates 1 hour and 40 minutes.
• Battery CGR-DU06 (PV-GS29/PV-GS39/PV-GS59
U.S.A.) or CGA-DU12 (PV-GS59 Canada) is
supplied.
• The times shown in the table are approximate
times. The numbers indicate the recording time
when the Viewfinder is used. The numbers in
parentheses indicate the recording time when the
LCD Monitor is used. In actual use, the available
recording time may be shorter.
• The times shown in the table are for continuous
recording at a temperature of 25 °C (77 °F) and
humidity of 60 %. If the Battery is charged at a
higher or lower temperature, the charging time may
be longer.
• We recommend the Battery Pack CGA-DU12 and
CGA-DU21 for long time recording (2 hours or
more for continuous recording, 1 hour or more for
intermittent recording.)
• The available recording time becomes shorter
if you use both of Viewfinder and LCD Monitor
simultaneously when rotating the LCD Monitor
forward to record yourself.
• The batteries heat up after use or charging. The
Camcorder being used will also heat up. This is
normal.
• Along with the reduction of the battery capacity,
the display will change:
→
→
→
→
. If the battery discharges, then
(
) will flash.
Re-attaching the Lens Cap
To protect the Lens surface, attach the Lens Cap.
• The Lens Cap and Lens Cap Cord come
preattached to the Grip Belt.
1
Pass one end of the Lens Cap Cord
through the attached eye on the Lens Cap.
Then pass the Lens Cap through the loop
made by itself and pull tight.
To Use as a Grip Belt
Adjust the length of the Grip Belt to the size of your
hand.
1
Detach the end of the Grip Belt.
2
Adjust the length of the Grip Belt to the
size of your hand.
3
Reattach the Grip Belt.
How to remove the Sensor tag
(For U.S.A. customers)
1
Detach the end of the Grip Belt.
2
Remove the Sensor tag. Then, replace the
Grip Belt.
