E
NGLISH - 35
Settings
SECURITY menu
J
Entering the SECURITY menu
Every time when you apply to the
SECURITY
menu, you
will be asked to perform the password operation. When
you apply to the
SECURITY
menu before you change
the password to your original, perform to input the
following factory default password operation.
Press
F
H
G
I
F
H
G
I
and the
ENTER
button.
Q
After you change the password
When you apply to the
SECURITY
menu after you
change the password to your original in the
SECURITY
PASSWORD CHANGE
menu, input the original
password operation.
You can activate the security system and the password
operation will be asked to perform when the projecting mode
started. Unless you perform the correct password operation, all
of the button controls will be disabled except the
POWER
STANDBY
and
SHUTTER
buttons.
You can change the password operation to your original.
1. Press a series of button operation up to 8 as a password
by using
F
G
I
and
H
.
2. Press the
ENTER
button.
3. Press the exact same series of button operation you
entered in the
NEW
password box for confirmation.
If a series of button operation is incorrect, you will be asked
to perform again.
4. Press the
ENTER
button.
You can set your original text, such as company name or URL
information, to display regularly on the projected image while
projecting.
You can enter your original text up to 22 characters for
DISPLAY SETTING
.
1. Enter your original text.
Use
F
G
I
H
to specify the location of the required
character.
2. Press the
ENTER
button.
The selected character will be displayed in the text box.
3. Repeat until finish your original text.
Select < or > and press the
ENTER
button to move the
cursor in the text box.
Select BS and press the
ENTER
button to erase a
character.
4. Select
OK
and press the
ENTER
button.
Select
CANCEL
or press the
MENU
button to return to the
previous step.
NOTE:
• The factory default password is valid until you change the
password in
SECURITY PASSWORD CHANGE
menu.
• The entered password operations will appear as asterisks in
the box.
SECURITY PASSWORD
OFF
Deactive
ON
Active
NOTE:
• When you activated the security system, make sure to change
the password to your original for safety.
• The factory default password is valid until you change the
password in
SECURITY PASSWORD CHANGE
menu.
Remote control
See “Navigating through the menu” on page 15.
See “Main menu and Sub-menu” on page 12.
SECURITY PASSWORD
CHANGE
NOTE:
• The entered password operations will appear as asterisks in
the box.
DISPLAY SETTING
OFF
Deactive
TEXT
Displays user defined text in
TEXT
CHANGE
on the screen while
projecting.
LOGO1
Displays user defined image over the
image.
LOGO2
Displays PANASONIC logo over the
image.
TEXT CHANGE
NOTE:
• Special software is required to define the
LOGO1
image.
Contact to an Authorised Service Centre.
Summary of Contents for DLP PT-D6000
Page 52: ...Printed in Japan S0209 1039B ...
