Preparation
14
SQT0433 (ENG)
Inserting/Removing the microSIM card
(optional)
A microSIM card is an integrated circuit that stores the customer’s phone number
and other information.
Calls and messages (SMS) cannot be sent or received unless the microSIM card
is inserted.
If you have inserted/removed the microSIM card, do not deliberately touch or
damage the IC terminals.
1
Open the card slot cover with the control ring face of this unit
facing upwards.
2
Hold the hooks of the tray with your fingertips and pull it out
horizontally.
3
Mount the microSIM card on the tray
C
with the IC face
A
on
top.
≥
Take note of the notch
B
on the microSIM card and mount it in the correct direction.
4
Check the orientation of this unit and insert the tray
horizontally into the slot of the microSIM card.
5
Close the card slot cover.
DMC-CM1P-SQT0433_eng.book 14 ページ 2015年4月13日 月曜日 午後1時1分