13
(ENG) VQT2M46
•
When the camera is used in the following conditions, a gap may occur between
the camera and the card/battery door or terminal cover, causing water to leak
and malfunction.
–
When there are foreign objects, such as lint, hair, sand, etc., between the card/
battery door or terminal cover and the camera.
–
When the rubber seal has deteriorated.
–
When the [LOCK] switch is not closed on the card/battery door and terminal
cover.
Causes of water leak
A
: Water will leak through
the gap formed.
B
: water
C
: Terminal cover
D
: Card/Battery door
E
: Hair and lint
F
: Sand and dust
G
: Crack and deformation
H
: Fluid
DMC-FT2&TS2GN-VQT2M46_eng.book 13 ページ 2010年2月9日 火曜日 午前8時46分