background image

105

VQT1S88

Others

Do not press the LCD monitor with excessive force. Uneven colors may appear on the LCD 
monitor and it may malfunction.

If the camera is cold when you turn it on, the picture on the LCD monitor will be slightly darker 
than usual at first. However, the picture will return to normal brightness when the internal 
temperature of the camera increases.

Do not press the lens with excessive force.

Do not leave the camera with the lens facing the sun as rays of light from the sun may cause it 
to malfunction. Also, be careful when placing the camera outside or near a window.

The battery is a rechargeable lithium ion battery. Its ability to generate power comes 
from the chemical reaction that takes place inside it. This reaction is susceptible to 
the surrounding temperature and humidity. If the temperature is too high or too low, 
the operating time of the battery will become shorter.

Always remove the battery after use.

Store the removed battery in the battery carrying case (supplied).

If you drop the battery accidentally, check to see if the 
body of the battery and the terminals are damaged.

Inserting a damaged battery in the camera will damage the 
camera.

Bring charged spare batteries when going out.

Be aware that the operating time of the battery becomes shorter in 
low temperature conditions such as at a ski resort.

When you travel, do not forget to bring the battery charger (supplied) so that you can charge 
the battery in the country that you are traveling in.

Dispose of unusable battery.

The battery has a limited life.

Do not throw the battery into fire because it may cause an explosion.

The unusable battery should be discarded in accordance with battery recycling laws. Call the 
RBRC hotline at 1-800-822-8837 for information.

Do not allow battery terminals to come into contact with metal objects (such as 
necklaces, hairpins etc.).

This can cause short circuiting or heat generation and you may be badly burned if you touch a 
battery.

About the LCD monitor

Extremely high precision technology is employed to produce the LCD monitor screen. 
However, there may be some dark or bright spots (red, blue or green) on the screen. 
This is not a malfunction. The LCD monitor screen has more than 99.99% effective 
pixels with a mere 0.01% of the pixels inactive or always lit. The spots will not be 
recorded on pictures on the built-in memory or a card.

About the Lens

Battery

DMCFX150-VQT1S88_mst.book  105 ページ  2008年7月9日 水曜日 午後8時18分

Summary of Contents for DMC FX150K - Lumix Digital Camera









































































































































Reviews: