VQT1S88
46
Advanced (Recording pictures)
[REC] mode:
²
Taking Pictures with Exposure Set Manually
(
²
: Manual exposure)
Determine the exposure by manually setting the aperture value and the shutter speed.
Slide the [REC]/[PLAYBACK] selector switch to [
!
], and then set the
mode dial to [
²
].
Press
3
/
4
to select aperture or shutter
speed, and press
2
/
1
to set.
•
The aperture values given in the table above are values when the zoom position is at
maximum Wide.
•
Depending on the zoom magnification, some of the aperture values cannot be selected.
Press [MENU/SET].
•
You can also press the shutter button halfway to finish.
Press the shutter button halfway.
•
The manual exposure assistance
A
appears for
about 10 seconds to indicate the exposure.
•
Set the aperture value and the shutter speed again
when the exposure is not adequate.
Manual setting screen is displayed when
3
is
pressed.
Take the pictures.
∫
Manual Exposure Assistance
•
Manual exposure assistance is an approximation. It is recommended to record by confirming in
playback mode.
Note
•
Brightness of the LCD monitor may differ from the actual picture recorded. Please confirm in
playback mode.
•
If the exposure is not adequate, the aperture value and the shutter speed turn red when the
shutter button is pressed halfway.
Available Aperture Value
Available Shutter Speed (Sec)
(Per 1/3 EV)
F2.8
60 to
1/1300
F9.0
60 to
1/2000
The exposure is adequate.
Set to faster shutter speed or larger aperture value.
Set to slower shutter speed or smaller aperture value.
1
2
3
A
4
5
DMCFX150-VQT1S88_mst.book 46 ページ ２００８年７月９日 水曜日 午後８時１８分
