15
Preparation/Basic
(ENG) DVQX1043
A
Check the orientation of the card.
• Push it securely all the way until you hear a “click” while being careful about the direction in
which you insert it.
To remove the card, push the card until it clicks, then pull the card out upright.
At the time when this camera is purchased, the monitor is stowed in the camera body.
Bring out the monitor as shown below.
1
Open the monitor. (Maximum 180
o
)
2
It can be rotated 180
o
forwards.
3
Return the monitor to its original position.
• Only rotate the monitor after opening it wide enough, and be careful not to use
excessive force as it may be damaged.
• When not using the monitor it is recommended that you close it with the screen facing inward to
prevent dirt and scratches.
Inserting the Card (Optional)
Monitor
DMC-FZ2000MST-DVQX1043_eng.book 15 ページ 2016年9月19日 月曜日 午前11時17分