Recording
34
DVQX1043 (ENG)
∫
About [More settings] (step
2
in P33)
¢
Not available for burst recording. When using burst recording, if you press and hold the
shutter button, recording will be performed continuously until a specified number of pictures
are taken.
Recording Mode:
∫
About [More settings] (step
2
in P33)
• When using burst recording, if you press and hold the shutter button, recording will be
performed until a specified number of pictures are taken.
∫
About [More settings] (step
2
in P33)
¢
Not available for burst recording. When using burst recording, if you press and hold the
shutter button, recording will be performed continuously until a specified number of pictures
are taken.
Exposure Bracket
[Step]
Sets the number of pictures to be taken and the exposure
compensation range.
[
3
・
1/3
] (Takes three pictures with an interval of 1/3 EV
)
to
[
7
・
1
] (Takes seven pictures with an interval of 1 EV)
[Sequence]
Sets the order in which pictures are taken.
[Single Shot Setting]
¢
[
]: Takes one picture each time you press the shutter button.
[
]: Takes all the pictures set to be taken when you press the
shutter button once.
Aperture Bracket
[Image Count]
[3], [5]: Takes a specified number of pictures with different
aperture values within the range based on the initial aperture
value.
[ALL]: Takes pictures using all aperture values.
Focus Bracket
[Step]
Sets the interval between focus positions.
[Image Count]
¢
Sets the number of pictures to be taken.
[Sequence]
[0/
s
/
r
]:
Alternately moves the focus position closer and farther
away within the range centred on the initial position as you take
pictures.
[0/
r
]:
Moves the focus position farther away from the initial
position as you take pictures.
DMC-FZ2000MST-DVQX1043_eng.book 34 ページ 2016年9月19日 月曜日 午前11時17分