11 CONFIRMATION OF FIRMWARE VERSION
The Firmware version can be confirmed by ordering the following steps:.
·
Step 1. The temporary cancellation of factory setting:
Set the mode dial to “ P ”.
While keep pressing Optical Image Stabilizer and “ UP of Cross key” simultaneously. turn the power on with inserting the
SD memory card which has a few photo data.
·
Step 2. Confirm the version:
1. Set the mode dial to “ Playback ” and then press DISPLAY to switch to LCD with indication. <Fig. A>
2. Press Optical Image Stabilizer and “ DOWN of Cross key” simultaneously. (No need to keep pressing.)
(The version information is displayed on the LCD with light blue colour letters.) <Fig. B>
CAUTION:
The version information does not display if the LCD has switched to LCD with indication already.
In this case, press DISPLAY to switch to LCD with indication.
<Point>
·
The firmware version and EEPROM version can be confirmed with the information (1).
·
The information (2), (3) are just reference.
24
DMC-FZ5PP / DMC-FZ5PL / DMC-FZ5EB / DMC-FZ5EG / DMC-FZ5EGM / DMC-FZ5GC / DMC-FZ5GD / DMC-FZ5GK / DMC-FZ5GN / DMC-FZ5GT / DMC-FZ5SG