VQT2S42
106
Advanced (Recording pictures)
[REC] mode:
¿
Taking pictures that match the scene being
recorded
(
: Scene mode)
When you select a scene mode to match the subject and recording situation, the camera
sets the optimal exposure and hue to obtain the desired picture.
Set the mode dial to [
].
Press
3
/
4
/
2
/
1
to select the scene mode.
• You can also use the rear dial to select.
Press [MENU/SET] to set.
• The menu screen is switched to the recording screen in the
selected scene mode.
∫
About the information
• If you press [DISPLAY] when selecting a scene mode in step
2
,
explanations about each scene mode are displayed. (If you press
[DISPLAY] again, the screen returns to the scene mode menu.)
Note
• To change the scene mode, press [MENU/SET], and return to above step
2
by pressing
1
,
while selecting the scene mode menu [
] by pressing
3
/
4
/
2
/
1
.
• The scene mode flash setting is reset to the initial setting when the scene mode is changed and
then used.
• When you take a picture with a scene mode that is not adequate for the purpose, the hue of the
picture may differ from the actual scene.
• The following items cannot be set in scene mode because the camera automatically adjusts
them to the optimal setting.
– [SENSITIVITY]/Items other than [STANDARD] and [STANDARD] (
) in Film Mode/
[METERING MODE]/[FLASH SYNCHRO]
¢
/[I.RESOLUTION]/[I.EXPOSURE]/
[ISO LIMIT SET]/[DIGITAL ZOOM]
¢
Can be set only when [PERIPHERAL DEFOCUS] is set.
Select this when you want to take pictures of a sunset view. This allows you to take vivid
pictures of the red colour of the sun.
Note
• The flash setting is fixed to [
Œ
].
• The initial setting for the AF mode is [
].
ï
[SUNSET]
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 106 ページ ２０１０年４月１３日 火曜日 午後７時４０分
