145
VQT2S42
Advanced (Recording pictures)
• It will display dial operation guide to the screen that is possible to
perform Exposure Compensation, Programme Shift, aperture setting,
or shutter speed setting when set to [ON].
A
Dial operation guide
• Imaging device and image processing is optimised when the camera is purchased. Use this
function when bright spots not in subject get recorded, and it is bothering you.
• Turn the camera off and on after the pixels are corrected.
• Dust reduction function will operate automatically when the camera is turned on, but you can
use this function when you see dust. (P188)
[TOUCH SHUTTER]
Enables/disables the Touch Shutter function.
[OFF]:
Touch Shutter icon is not displayed on the screen, and
the Touch Shutter function is disabled.
[ON]:
Touch Shutter icon is displayed on the screen, and
[ON]/[OFF] of the Touch Shutter function can be
switched when the icon is touched.
[TOUCH GUIDE]
When playing back the pictures, this allows you to set either to
display or not display the guide screen of the touch panel.
[OFF]/[ON]
[TOUCH SCROLL]
This allows you to set the speed of continuously forwarding or
rewinding pictures using touch operation.
[H]:
High speed
[L]:
Low speed
[DIAL GUIDE]
Sets if the operation switch guide when the mode dial is switched
to , ,
and
is
to
be
displayed
or
not.
[OFF]/[ON]
[MENU RESUME]
The last operated menu position is saved even if the camera is
turned off.
[OFF]/[ON]
[PIXEL REFRESH]
It will perform optimization of imaging device and image
processing.
[SENSOR CLEANING]
Dust reduction to blow off the debris and dust that have affixed to
the front of the imaging device is performed.
A
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 145 ページ 2010年4月13日 火曜日 午後7時40分