VQT2S42
182
Others
Using the External Microphone (optional)
If you use the stereo microphone (DMW-MS1; optional), you can switch to either stereo or
monaural sound recording.
It is also possible to reduce the wind noise efficiently by switching the [WIND CUT OFF/
ON] switch to [ON].
Preparations: Turn off the camera and close the built-in flash.
Attach the stereo microphone to the hot
shoe
A
.
• Be sure to firmly secure to the stereo microphone with
the lock ring
B
.
Firmly connect the stereo mini-plug cord to
the [MIC] socket on the camera as far as it
will go.
Turn on the camera and the stereo
microphone.
• While the external microphone is connected, [
] is
displayed on the screen.
∫
About the Off/On Mode Selector Switch
Battery Check Lamp [BATTERY]
• When the Off/On Mode Selector Switch is changed from [OFF] to [MONO] or [STEREO], the
Battery Check Lamp [BATTERY] will light temporarily if there is still plenty of power in the
battery. If the Battery Check Lamp [BATTERY] does not light temporarily, replace the battery
with a new one.
Note
• When attaching the stereo microphone, do not hold only the stereo microphone because it may
detach from the camera.
• Set the wind noise reduction only on the stereo microphone side.
• Do not open the built-in flash when the stereo microphone is attached.
• The stereo microphone cannot be used while the external flash (optional) is in use.
• The stereo microphone cannot be used while the remote shutter (DMW-RSL1; optional) is in use.
• To playback audio in stereo, use the HDMI mini cable (optional) and playback by connecting to
a TV or playback with a PC.
• Read the operating instructions of the stereo microphone for details.
[OFF]
:
Turn off the stereo microphone power.
[MONO]
:
Records sound in front of the digital
camera in monaural.
[STEREO]
: Records sound in a wide area in stereo.
REMOTE
MIC
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 182 ページ 2010年4月13日 火曜日 午後7時40分