195
VQT2S42
Others
• Is the subject focused?
>
[FOCUS PRIORITY] is set to [ON] at the time of purchase, and so you cannot take pictures
until the subject is in focus. If you want to be able to take a picture when you press the
shutter button fully even if the subject is not focused, set [FOCUS PRIORITY] in the
[CUSTOM] menu to [OFF]. (P141)
• Picture might look whitish when lens or image sensor gets dirty with finger print or similar.
>
If the lens is dirty turn the camera off and then gently wipe the lens surface with a soft dry
cloth.
>
Refer to P188 when the image sensor gets dirty.
>
Check that the exposure is correctly compensated. (P73)
• Is the AE Lock (P86) applied incorrectly?
>
Unset the settings of White Balance Bracket (P91).
• The subject is beyond the focus range of the camera. (P52)
• There is camera shake (jitter) or the subject is moving slightly. (P54)
• Is [FOCUS PRIORITY] in the [CUSTOM] menu set to [OFF]? (P141)
In this case, the picture may not be properly focused even if [AFS] or [AFC] in Focus Mode is
set.
• Is the AF Lock (P86) applied incorrectly?
• The shutter speed will become slower and the Optical Image Stabilizer function may not work
properly when taking pictures especially in dark places.
>
We recommend holding the camera firmly with both hands when taking pictures. (P41)
>
We recommend using a tripod and the self-timer (P78) when taking pictures with a slow
shutter speed.
• Is the number of recordable pictures 2 or less?
Recording
Taking pictures is not possible.
The shutter will not operate immediately when the shutter button is pressed.
The recorded picture is whitish.
The recorded picture is too bright or dark.
2 or 3 pictures are taken at one time.
The subject is not focused properly.
The recorded picture is blurred.
The Optical Image Stabilizer is not effective.
Taking pictures using White Balance Bracket is not possible.
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 195 ページ ２０１０年４月１３日 火曜日 午後７時４０分
