background image

G MICRO SYSTEM is a lens exchange type digital 

camera system of LUMIX based on a Micro Four Thirds 

System standard.

Micro Four Thirds™ and Micro Four Thirds Logo marks 

are trademarks or registered trademarks of Olympus 

Imaging Corporation, in Japan, the United States, the 

European Union and other countries.

Four Thirds™ and Four Thirds Logo marks are 

trademarks or registered trademarks of Olympus 

Imaging Corporation, in Japan, the United States, the 

European Union and other countries.

SDXC Logo is a trademark of SD-3C, LLC.

The “AVCHD”, “AVCHD Lite” and the “AVCHD”, 

“AVCHD Lite” logo are trademarks of Panasonic 

Corporation and Sony Corporation.

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby 

Laboratories.

HDMI, the HDMI Logo, and High-Definition Multimedia 

Interface are trademarks or registered trademarks of 

HDMI Licensing LLC in the United States and other 

countries.

HDAVI Control™ is a trademark of Panasonic 

Corporation.

QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., 

used under license therefrom.

Adobe is a trademark or registered trademark of Adobe Systems Incorporated in the United 

States and/or other countries.

Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

Other names, company names, and product names printed in these instructions are 

trademarks or registered trademarks of the companies concerned.

This product is licensed under the AVC patent portfolio license for the personal and 

non-commercial use of a consumer to (i) encode video in compliance with the AVC Standard 

(“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a 

personal and non-commercial activity and/or was obtained from a video provider licensed to 

provide AVC Video. No license is granted or shall be implied for any other use. Additional 

information may be obtained from MPEG LA, LLC. See http://www.mpegla.com.

B

VQT2S42

F0410SM0

EU

Panasonic Corporation

Web Site: http://panasonic.net 

Pursuant to at the directive 2004/108/EC, article 9(2)

Panasonic Testing Centre
Panasonic Marketing Europe GmbH

Winsbergring 15, 22525 Hamburg, Germany

 Panasonic Corporation 2010

DMC-G2K&G2W&G2EB-VQT2S42_eng.book  212 ページ  2010年4月13日 火曜日 午後7時40分

Summary of Contents for DMC-G2EB





















































































































































































































Reviews: