VQT2S42
36
Preparation
Perform these settings if you need to.
About the Setup Menu
[CLOCK SET], [ECONOMY] and [AUTO REVIEW] are important items. Check their
settings before using them.
• In the Intelligent Auto Mode, only [CLOCK SET], [WORLD TIME], [BEEP], [LCD MODE] and
[LANGUAGE] can be set.
For details on how to select the [SETUP] menu settings, refer to P33.
• Refer to P31 for details.
• Refer to P128 for details.
• Refer to P126 for details.
• When you connect the camera to a TV, the volume of the TV speakers does not change.
• Adjust the brightness of the screen with
3
/
4
, contrast and saturation
with
2
/
1
or the rear dial.
• When [DISPLAY] is pressed in screen shown right, it will switch to the
colour adjustment screen. Adjust between red and green with
3
/
4
, or
between orange and blue with
2
/
1
or the rear dial.
Press [MENU/SET] to return to the LCD adjustment screen.
• It will adjust the LCD monitor when the LCD monitor is in use, and the
viewfinder when the viewfinder is in use.
U
[CLOCK SET]
Setting Date/Time.
[WORLD TIME]
Set the time in your home area and travel destination.
“
[DESTINATION]:
Travel destination area
–
[HOME]:
Your home area
—
[TRAVEL DATE]
Set the departure date and the return date of the vacation.
[TRAVEL SETUP]
[OFF]/[SET]
[LOCATION]
[OFF]/[SET]
[BEEP]
Set the volume of the focus confirmation beep, the self-timer beep
and the alarm beep.
[
s
] (Muted)
[
t
] (Low)
[
u
] (High)
u
[VOLUME]
Adjust the volume of the speaker to any of 7 levels.
[MONITOR]/
[VIEWFINDER]
Brightness, colour, or red or blue tint of the LCD monitor/
viewfinder is adjusted.
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 36 ページ ２０１０年４月１３日 火曜日 午後７時４０分
