75
VQT2S42
Advanced (Recording pictures)
• First burst speed has no relation with the transfer speed of the card.
• The burst speed values given above apply when the shutter speed is 1/60 or faster and when
the flash is not activated.
• The Burst Mode speed may become slower depending on the following settings.
– [SENSITIVITY] (P92)/[PICTURE SIZE] (P129)/[QUALITY] (P130)/[FOCUS PRIORITY]
(P141)/Focus mode
• Refer to P130 for information about RAW files.
∫
Focusing in Burst Mode
The focus changes depending on the setting for [FOCUS PRIORITY] (P141) in the
[CUSTOM] menu and the focus mode setting.
¢
1 When subject is dark, the focus is fixed on the first picture.
¢
2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢
3 Burst speed takes priority, and focus is estimated within possible range.
Note
• We recommend using the remote shutter (DMW-RSL1; optional) when you want to keep the
shutter button pressed fully while taking pictures in Burst Mode. Refer to P181 for information
about the remote shutter.
• When the burst speed is set to [H], the exposure and white balance are fixed at the settings
used for the first picture for the subsequent pictures as well. When the burst speed is set to [M]
or [L], they are adjusted each time you take a picture.
• If you are following a moving subject while taking pictures in a place (landscape) indoors,
outdoors etc. where there is a large difference between the light and shade, it may take time
until the exposure is stable. If burst is used at this time, the exposure may not become optimal.
• Since the shutter speed becomes slower in dark places, the burst speed (pictures/second) may
become slower.
• When set to [H], the Auto Review function is activated regardless of the Auto Review setting.
(Will not hold) You cannot set the Auto Review function in the [SETUP] menu.
When set to [M] or [L], Live View is displayed between burst frames.
• When the flash is activated, you can take only 1 picture.
• White Balance Bracket (P91) will record 3 pictures at 1 recording, so it will take longer to
be able to take next picture.
• Maximum of 3 films will be recorded depending on the Multi Film Bracket setting during
the Multi Film Bracket recording (P96).
• The Burst Mode is disabled during recording of the motion pictures.
Focus mode
Focus Priority
Focus
AFS
ON
At the first picture
OFF
AFC
¢
1
ON
Normal focusing
¢
2
OFF
Predicted focusing
¢
3
MF
—
Focus set with Manual Focus
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 75 ページ ２０１０年４月１３日 火曜日 午後７時４０分
