77
VQT2S42
Advanced (Recording pictures)
∫
Changing the settings for [STEP] and [SEQUENCE] in Auto Bracket
1
Select [AUTO BRACKET] in the [REC] mode menu. (P33)
2
Press
3
/
4
to select [STEP] or [SEQUENCE] and then
press
1
.
3
Press
3
/
4
to select the setting and then press [MENU/SET].
4
Press [MENU/SET] twice to close the menu.
• You can also press the shutter button halfway to close the menu.
Note
• When taking pictures using Auto Bracket after setting the Exposure Compensation range, the
pictures taken are based on the selected Exposure Compensation range.
• The exposure may not be compensated with Auto Bracket depending on the brightness of the
subject.
• The Auto Review function is activated regardless of the Auto Review setting. (Will not hold) You
cannot set the Auto Review function in the [SETUP] menu.
• When the flash is activated, you can take only 1 picture.
• Set number of pictures cannot be recorded if the recordable number of pictures is less than set
number of pictures.
• Settings for Multi Film Bracket have priority during the Multi Film Bracket recording
(P96).
• The Auto Bracket will be disabled during recording of the motion pictures.
Item
Settings
Item
Settings
[STEP]
[3•1/3] (3 pictures)
[SEQUENCE]
[0/
`
/
_
]
[3•2/3] (3 pictures)
[
`
/0/
_
]
[5•1/3] (5 pictures)
[5•2/3] (5 pictures)
[7•1/3] (7 pictures)
[7•2/3] (7 pictures)
DMC-G2K&G2W&G2EB-VQT2S42_eng.book 77 ページ ２０１０年４月１３日 火曜日 午後７時４０分
