- 223 -
Others
•
When recording under fluorescent or LED lighting fixture, etc., increasing the shutter speed may
introduce slight changes to brightness and colour. These are a result of the characteristics of the
light source and do not indicate a malfunction.
•
When recording subjects in extremely bright locations or recording under fluorescent lighting, LED
lighting fixture, mercury lamp, sodium lighting, etc., the colours and screen brightness may change
or horizontal striping may appear on the screen.
•
There may be defective pixels in the image sensor. Perform [Pixel Refresh]
(P77)
.
•
Are you in Exposure Compensation operation?
>
Press the rear dial to switch to Exposure Compensation operation.
(P88)
>
Set the [Function Lever] to [AUTO].
(P15)
•
If the subject contains sections that differ in colour to the surroundings, touch those sections or the
main colours of the subject to set the AF frame
(P97)
.
•
Is your finger covering up the speaker?
(P10)
Striping or flicker may appear under lighting such as fluorescent lighting and LED
lighting fixture.
•
This is characteristic of MOS sensors which serve as the camera’s pickup
sensors.
This is not a malfunction.
•
When you see noticeable flicker or striping while recording a motion picture, you
can reduce the flicker or striping by setting up [Flkr Decrease]
(P162)
and fixing
the shutter speed. It is possible to select a shutter speed from
[1/50], [1/60], [1/100], or [1/120].
The brightness or the hue of the recorded picture is different from the actual scene.
Bright spot not in subject is recorded.
You cannot compensate the exposure.
The function lever does not work.
Subject cannot be locked.
(AF tracking not possible)
Operation sound is small.
Summary of Contents for DMC-G5W
Page 3: ...3 ENG VQT4H04 ...
