263
10.
Using the Wi-Fi/NFC Function
Using the NFC “Near Field Communication” function, you can easily transfer data
necessary for a Wi-Fi connection between this camera and the smartphone/tablet.
1
Launch “Image App” on your smartphone/tablet.
2
While [
] is displayed on the screen of
the smartphone, touch the smartphone to
[
] of the camera.
3
When the connection confirmation screen
is displayed on the camera, select [Yes].
4
Touch the smartphone to [
] of the
camera again.
•
Steps
3
through
4
are not required from the
second time on.
•
It may take time to complete the connection.
•
When the smartphone has connected, an image
of this camera will be displayed on the
smartphone.
•
The connected smartphone is registered to this
camera.
•
If a connection attempt by touching fails, restart
the “Image App”, and then display the screen in
step
1
again.
•
If a connection is established during single picture playback, the picture will be transferred
to the smartphone.
(P266)
Connecting to a smartphone/tablet by using the NFC function
∫
Compatible models
This function can be used with the NFC compatible device with Android (OS version
2.3.3 or higher). (excluding some models)
Preparation:
(On the camera)
•
Set [NFC Operation] to [ON].
(P302)
(On your smartphone/tablet)
•
Check that your smartphone/tablet is a
compatible model.
•
Turn on the Wi-Fi function.
•
Install the “Image App” in advance.
(P258)
