- 15 -
Preparation
Align the lens fitting marks
A
(red marks) and then rotate the lens in the
direction of the arrow until it clicks.
•
Do not press the lens release button
B
when you attach a lens.
•
Do not try to attach the lens when holding it at an angle to the camera body as the lens mount
may get scratched.
•
Be sure to remove the lens cap when recording.
Note
•
Do not insert your fingers into the mount when the lens and body cap
are removed from the camera body.
•
To prevent dust or debris from adhering to internal parts of the
camera body, fit the body cap to the mount on the camera body.
•
To avoid damaging the contact points, fit the lens rear cap to the
removed lens.
•
It is recommended to attach the lens cap or attach the MC Protector
(optional) to protect the lens surface when carrying.
(P199)
Attaching the lens
Preparations: Remove the lens rear cap from the lens.
•
If the body cap is fitted to the camera, remove it.
