Playback/Editing
- 168 -
Recorded motion picture can be
divide
d in two. It is recommended for when you want to
divide
a part you need with a part you do not need.
Dividing a motion picture is permanent. Decide before you divide!
1
Select [VIDEO DIVIDE] on the [PLAYBACK] Mode menu.
(P62)
2
Press
2
/
1
to select the motion picture to divide, and then press [MENU/SET].
4
Press
4
.
•
Confirmation screen is displayed. It is executed when [YES] is selected.
Exit the menu after it is executed.
•
Motion picture may be lost if the card or battery is removed while processing the dividing.
Note
•
The [VIDEO DIVIDE] feature only works on motion pictures recorded on this camera.
•
Avoid trying to divide motion picture near the very beginning or end of the motion picture.
•
With [MP4] motion pictures, the order of pictures will change if divided.
It is recommended to search these motion pictures by using Calendar Playback
(P53)
or
[VIDEO ONLY] in the [PLAYBACK MODE].
•
The [VIDEO DIVIDE] feature will be disabled during the following conditions:
–
Motion pictures with a short recording time
[VIDEO DIVIDE]
3
Press
3
at the location to divide.
•
Motion picture is played back from the same location when
3
is
pressed again.
•
You can finely adjust the location for division by pressing
2
/
1
while the motion picture is paused.
