98
VQT1L50
Others
Batteries
Be sure to remove the batteries when
you will not be using the camera for a
long period of time.
If the temperature is too high or low,
the terminals may rust causing a
malfunction.
If you drop the batteries accidentally,
check to see if the body of the batteries
and the terminals are damaged.
Inserting a damaged battery in the
camera will damage the camera.
Bring charged spare batteries when
going out.
Be aware that the operating time of
the batteries becomes shorter in low
temperature conditions such as at a ski
resort.
Dispose of unusable batteries.
Batteries have a limited life.
Do not throw batteries into
fi
re because
they may cause an explosion.
Unusable batteries should be discarded
in accordance with battery recycling laws.
Call the RBRC hotline on 1-800-822-
8837 for information.
Do not allow battery terminals to come
into contact with metal objects (such as
necklaces, hairpins, etc.).
This can cause short circuiting or heat
generation and you may be badly burned
if you touch the batteries.
Card
Do not leave the card in places where
there is high temperature or direct
sunlight, or where electromagnetic
waves or static electricity are easily
generated.
Do not bend or drop the card.
The card may be damaged or the
recorded content may be damaged or
erased.
Store the card in the card case or the
storage bag after use and when you
store or carry the card.
■
•
•
•
•
•
•
•
■
•
•
Do not allow dirt, dust or water to enter
the terminals on the back of the card
and do not touch the terminals with your
fi
ngers.
About the picture data
Recorded data may be damaged or
lost if the camera breaks down due to
inappropriate handling. Panasonic will
not be liable for any damage suffered
due to loss of recorded data.
About tripods
When you use a tripod, make sure the
tripod is stable when this unit is attached
to it.
You may not be able to remove the card
or the battery when using a tripod.
Make sure that the screw on the tripod
is not at an angle when attaching or
detaching the camera. You may damage
the screw on the camera if you use
excessive force when turning it. Also, the
camera body and the rating label may be
damaged or scratched if the camera is
attached too tightly to the tripod.
Read the operating instructions for the
tripod carefully.
•
■
•
■
•
•
•
•
VQT1L50̲DMC-LS80̲P-PC.indd 98
VQT1L50̲DMC-LS80̲P-PC.indd 98
2007/12/31 16:03:59
2007/12/31 16:03:59
Summary of Contents for DMC-LS80k - Lumix Digital Camera
Page 123: ...123 VQT1L50 Others MEMO ...