Application (Record)
Taking pictures with Manual Focus
- 105 -
VQT4J11
●
You can adjust the focus using the [ND/FOCUS] lever even during motion picture
recording. Note, however, that indications such as MF assist and focus range are not
displayed.
●
After zoom operation, readjust the focus.
●
The focus range displayed by Manual Focus is a reference value. Confirm the focus
on the screen ([MF Assist] screen).
●
After canceling [Sleep Mode], be sure to readjust the focus.
●
When Manual Focus is used together with AE Lock, it is easier to confirm the focus.
■
Enlarged display (MF assist)
When [MF Assist] in the [Setup] menu is [ON] and you perform the Manual Focus
operation, an enlarged display appears. (MF assist)
•By pushing the [ND/FOCUS] lever during an enlarged display, you can set the
magnification to approx. 5x, 10x or 4x (only at the center of the screen).
•Approximately 2 seconds after the Manual Focus operation, the display switches to
normal.
●
To change the position of an enlarged display
Press [MENU/SET] during the Manual Focus operation (while the enlarged display
is displayed)
Use cursor button to move the enlarged display
•To return the enlarged display to the center → Press [DISP.] button
Press [MENU/SET]
●
MF assist is not displayed in the Digital Zoom area.
■
1 Shot AF
When [1 Shot AF] is registered to [Fn Button Set], you can press once to activate
Auto Focus temporarily and focus on the subject.
