Panasonic DMC-LX7K Owner'S Manual Download

Page: 107 / 226

Application (Record)

Taking pictures with the built-in flash

- 107 -

VQT4J11

Changing the setting of the flash

Select [Flash] in the [Rec] menu

•For the setting procedures of the menu.

(→25)

Press to select a type and press [MENU/SET]

Type, operations

Uses

[Auto]

•Automatically judges when to use flash

Normal use

[Auto/Red-Eye]

•Automatically judges when to use flash (reduces

red-eye)

Taking pictures of subjects in dark

places

[Forced Flash On]

•Always uses flash

Taking pictures with backlight or

under bright lighting (e.g. fluorescent)

[Slow Sync./Red-Eye]

•Automatically judges when to use flash

(reduces red-eye; slow shutter speed to take

brighter pictures)

Taking pictures of subjects against a

nightscape (tripod recommended)

Two flashes will be emitted. Do not move until after the second flash. Interval between flashes varies

according to brightness of subject.

When [Red-Eye Removal] in the [Rec] menu is set to [ON], the icon changes to [

]/[

], red-

eye is automatically detected and the picture data is corrected. (Only when [AF Mode] is (Face

Detection))

●

When the built-in flash is closed, [ ] (Forced flash off) is set regardless of the flash

setting.

●

In [Intelligent Auto] mode, [ ] is set and light is emitted according to the subject and

the brightness if you open the built-in flash.

●

You can adjust the intensity of the flash using [Flash Adjust.] in the [Rec] menu.

(→145)

●

You can use [Flash Synchro] in the [Rec] menu to set whether the first curtain sync or

the second curtain sync will be used.

(→144)

●

The effect of red-eye reduction varies depending on the subject and is affected by

factors such as distance to the subject, whether the subject is looking at the camera

during preliminary flash, and so on. In some cases, the effect of red-eye reduction

may be negligible.

●

Flash settings may be changed when changing recording mode.

●

Scene Mode flash settings are restored to default when Scene Mode is changed.

●

If light from the flash on a subject is insufficient, neither the proper exposure nor White

Balance is achieved.

Summary of Contents for DMC-LX7K



































































































































































































































Search results

Summary of Contents for DMC-LX7K

Reviews:

Related manuals for DMC-LX7K

Brands by name

Popular brands

Panasonic DMC-LX7K, Owner'S Manual

Search results

Summary of Contents for DMC-LX7K

Reviews:

Related manuals for DMC-LX7K

Brands by name

Popular brands