Preparation
22
VQT0U87
[POWER SAVE]
(Except for
mode)
Press [
] to display the [SETUP] menu
and select the item to set. (P20)
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:
Power save mode is activated (the
camera is automatically turned off to
save the battery life) if the camera
has not been used for the time
selected on the setting.
[OFF]:
Power save mode is not activated.
• Press the shutter button halfway or turn
the camera off and on to cancel power
save mode.
• In simple mode [
], power save mode is
fixed to [2MIN.].
• When using the AC adaptor (DMW-AC6;
optional), connecting to a PC or a printer,
recording or playing back motion pictures
and during a slide show, power save
mode is not activated. (However, the
setting for power save mode is fixed to
[10MIN.] while pausing a slide show or
playing back a manual slide show.)
[ECONOMY]
(
mode only)
Press [
] to display the [SETUP] menu
and select the item to set. (P20)
Battery life is saved by reducing the
brightness of the LCD monitor and turning
it off automatically when the camera is not
being used in recording mode. (P47)
[LEVEL 1]:
The LCD monitor turns off if the
camera is not operated for
about 15 seconds in recording
mode.
[LEVEL 2]:
The LCD monitor turns off if the
camera is not operated for
about 15 seconds in recording
mode or for about 5 seconds
after taking a picture.
• The status indicator lights while the LCD
monitor is turned off. Press any button to
turn on the LCD monitor again.
• Power save mode is fixed to [2MIN.] in
economy mode.
[However, power save mode is not
activated when using the AC adaptor
(DMW-AC6; optional).]
• Economy mode will not work when the
menu screen is displayed or the self-timer
is set.
[BEEP]
Press [
] to display the [SETUP] menu
and select the item to set. (P20)
[
]: No operation sound
[
]: Soft operation sound
[
]: Loud operation sound
• The [BEEP] setting also affects simple
mode [
].
[NO.RESET]
Press [
] to display the [SETUP] menu
and select the item to set. (P20)
Set this when you want the file number of
the next recording to start from 0001. (The
folder number is updated and the file
number starts from 0001.)
• A folder number between 100 and 999
can be assigned.
When the folder number reaches 999, the
number cannot be reset. We recommend
formatting the card after saving the data
on a PC or elsewhere.
• To reset the folder number to 100, format
the built-in memory (P78) or the card first
and then use this function to reset the file
number.
A reset screen for the folder number will
then appear. Select [YES] to reset the
folder number.
• Refer to P81 for detailed information about
the file number and the folder number.
• The [NO.RESET] setting also affects
simple mode [
].
MENU
SET
MENU
SET
MENU
SET
MENU
SET
VQT0U87ENG.book 22 ページ ２００５年１２月２７日 火曜日 午後７時１２分
