Application (Record)
Changing the settings assigned to the
control ring/control dial
SQW0206
- 135 -
■
Recording mode:
Changes the settings assigned to the control ring/control dial.
Select [Ring/Dial Set] from [Setup] menu and press
[MENU/SET]
Use to select [ ] (control ring) or [ ] (control dial) and
press [MENU/SET]
Use to select the setting and press [MENU/SET]
Control ring
Control dial
[DEFLT] [Default Control]
[Zoom]
[Step Zoom]
[Exposure Comp.]
[Aspect Ratio]
[Sensitivity]
[White Balance]
[OFF] [Not Set]
—
•To return to the default setting,
select [Default Control].
•If you do not use the control ring,
select [Not Set].
■
When the settings assigned to both the control ring and control dial
have been changed
•Programme Shift cannot be used in [Program AE] Mode.
•The following operations can be performed from the Quick menu
(→34)
:
- Aperture adjustment in [Aperture-Priority] mode
- Shutter speed adjustment in [Shutter-Priority] mode
- Aperture and shutter speed adjustment in [Manual Exposure] mode
●
The assigned function setting applies to all the recording modes.
However, the assigned function may not operate when combined with certain
recording mode.
●
Manual Focus can be performed from the Quick menu even if the control ring settings
have been changed.
