82
VQT2N02
Message displays
[THIS MEMORY CARD CANNOT BE USED]
●
A MultiMediaCard was inserted.
→
Not compatible with the camera. Use a compatible card.
[THIS MEMORY CARD IS WRITE-PROTECTED]
●
Unlock the write-protect switch on the card. (
→
11)
[NO VALID PICTURE TO PLAY]
●
Take pictures, or insert a different card already containing pictures.
[THIS PICTURE IS PROTECTED]
●
Release the protection before deleting, etc. (
→
72)
[SOME PICTURES CANNOT BE DELETED] [THIS PICTURE CANNOT BE DELETED]
●
Non-DCF pictures (
→
31) cannot be deleted.
→
Save needed data on a computer or other device, and then use [FORMAT] on the camera to
erase the card. (
→
21)
[NO ADDITIONAL SELECTIONS CAN BE MADE]
●
The number of pictures that can be deleted at once has been exceeded.
●
More than 999 pictures have been set as [FAVORITE].
●
The number of pictures allowing [TEXT STAMP] or [RESIZE] (multiple settings) at once has been
exceeded.
[CANNOT BE SET ON THIS PICTURE]
●
Pictures that do not conform to DCF standards cannot be used for [PRINT SET] and [TEXT
STAMP].
[PLEASE TURN CAMERA OFF AND THEN ON AGAIN] [SYSTEM ERROR]
●
The lens is not working correctly.
→
Turn on power again.
(Consult the dealer or your nearest Service Centre if display still remains)
[SOME PICTURES CANNOT BE COPIED] [COPY COULD NOT BE COMPLETED]
●
Pictures cannot be copied in the following cases:
→
Picture of same name already exists in built-in memory when copying from card.
→
File is not of DCF standard.
→
Picture taken or edited on a different device.
[NOT ENOUGH SPACE ON BUILT-IN MEMORY] [NOT ENOUGH MEMORY ON THE CARD]
●
There is no space left on the built-in memory or the card. When you copy pictures from the built-in
memory to the card (batch copy), the pictures are copied until the capacity of the card becomes full.
[BUILT-IN MEMORY ERROR] [FORMAT BUILT-IN MEMORY?]
●
Displayed when formatting built-in memory via computer, etc.
→
Reformat directly using camera. Data will be deleted.
