Panasonic DMP-B15 - Portable Blu-ray Player Operating Instructions Manual Download

Page: 37 / 52

tti

RQT9334

(ENG)

Audio and video information

Before connecting, read the table below, and confirm the desired audio type and necessary settings (“BD-Video Secondary Audio”,
“Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD”). (

33)

≥

The number of channels listed is the maximum possible number of output channels.

HDMI AV OUT

≥

Also, depending on the specifications or the settings of the amplifier/receiver, the results of the output may vary.

*1 When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS

Digital Surround bitstream or down-mixed 2ch PCM (e.g., TV).

*2 When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.
*3

[BD-V]

: When playing BD-Video without secondary audio or button click sound, the audio is output as the same format as if “BD-

Video Secondary Audio” was set to “Off”.

*4 With PCM output, Dolby Digital EX and DTS-ES will be PCM audio decoded as Dolby Digital and DTS Digital Surround respectively.
*5

[BD-V]

: When “BD-Video Secondary Audio” is set to “On”, Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS

Digital Surround, however if playing BD-Video without secondary audio or button click sound, the audio is output as the original format.

*6 The output is PCM audio decoded as Dolby Digital for Dolby Digital Plus or Dolby TrueHD, and as DTS Digital Surround for DTS-HD

High Resolution Audio and DTS-HD Master Audio.

[BD-V]

: When the connecting equipment supports 7.1 channel surround, output will be extended from 5.1 ch or 6.1 ch to 7.1 ch

according to the specification of DTS, Inc.

[BD-V]

This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in
BD-Video. In order to enjoy these audio formats, the following conditions are necessary. (Part shown in the shaded area of table given above)

NECESSARY CONNECTIONS

≥

HDMI AV OUT terminal: (

25)

NECESSARY SETTINGS

≥

Set “BD-Video Secondary Audio” to “Off”. (

33)

≥

Set “HDMI Audio Output” to “On”. (

34)

≥

HDMI AV OUT terminal: Set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “Bitstream” or “PCM”. (

33)

≥

The button click sound on the menu and audio with secondary video in picture-in-picture mode (

17) is not output.

[BD-V]

Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally
be output in 60 frames/second in accordance with the display format. These can be output in 24p as the original. Therefore, high-
quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.

NECESSARY CONNECTIONS

≥

Connect to a TV supporting 1080/24p input via an HDMI cable.

NECESSARY SETTINGS

≥

“24p Output” and “HDMI Audio Output”: “On” (

34)

About audio from audio output terminals

Terminal

HDMI AV OUT

“Dolby D/Dolby D +/Dolby

TrueHD”/“DTS/DTS-HD”