Re
fe
re
n
c
e
RQT9334
(ENG)
41
This IP address is already in
use.
Please check the IP address
setting.
≥
This unit’s IP address is used by another device. Check the IP addresses of this unit,
personal computers, and routers, etc. If necessary, reconfigure them to avoid IP addresses
from being duplicated.
Unable to perform Connection
Test.
Please try again.
IP address not set correctly.
≥
Turn the unit off. Disconnect the power source (the AC adaptor or battery pack) and
reconnect it and try again. If the same symptom persists, then consult your dealer.
Connection Test was
unsuccessful. No reply
from host.
Please check the connection or
router settings.
≥
If you use a hub, then check the connection between the hub and the router. (
>
28)
j
Use the UPLINK port of the hub to connect to a router.
j
If the hub’s Link lamp does not light up, then check the cable connection, LAN terminal
connection, cable itself (a crossover cable may have been used by mistake), etc.
≥
Check the “IP Address”, “Subnet Mask”, and “Default Gateway” in the “IP Address/DNS
Settings”. (
>
29)
≥
If the MAC address information is required, then press [SETUP] to display the “Network”
menu. (
>
28)
Network connection refused.
Please confirm Setup “BD-Live
Internet Access.”
≥
When you set “BD-Live Internet Access” to “Allow (Limited)” and play BD-Live contents
which do not have a content owner certificate, the Internet access of the content is not
allowed. If you allow the content to connect to Internet, set “BD-Live Internet Access” to
“Allow (ALL)”. (
>
32)
Unable to check for latest
firmware version.
Please try again later.
≥
The firmware download server is currently unavailable. Please try again later.
DMPB15P-RQT9334_eng.book 41 ページ 2009年3月28日 土曜日 午後2時39分