12
VQT3W11
Specifications
≥
This unit supports “HDAVI Control 5” function.
Precautions for wireless
LAN connection
Specifications are subject to change without
notice.
Signal system
PAL/NTSC
Operating temperature
range
i
5
o
C to
i
35
o
C
Operating humidity
range
10 % to 80 % RH (no
condensation)
Digital audio output
Optical digital output (Optical
terminal)
HDMI AV output
Output connector: Type A
(19 pin) 1 system
SD card slot
1 system
USB slot
USB2.0
1 system
Ethernet
10BASE-T/100BASE-TX
1 system
Wireless LAN
Standard Compliance:
IEEE802.11 b/g/n
Frequency range:
2.4 GHz
band
Security:
WPA
TM
/WPA2
TM
(Encryption Type: TKIP/AES,
Authentication Type: PSK),
WEP (64 bit/128 bit)
LASER Specification
Class 1 LASER Product
Wave length:
790 nm (CDs)/
660 nm (DVDs)/405 nm (BDs)
Laser power:
No hazardous
radiation is emitted with the
safety protection
Power supply
DC 12 V (DC IN terminal)
Power consumption*
Approx. 8.9 W
Power consumption in
standby mode*
Approx. 0.5 W
Power consumption in
quick start standby
mode*
Approx. 4 W
AC Adaptor
Power source:
100 to 240 V,
50/60 Hz
Power consumption:
42 W
DC output:
DC 12 V 2500 mA
Dimensions (W
k
H
k
D)
Horizontal installation
with no pedestal
179 mm
k
27 mm
k
180 mm
≥
Including the projecting parts
Dimensions (W
k
H
k
D)
Horizontal diagonal
installation with
pedestal
253 mm
k
95 mm
k
250 mm
≥
Including the projecting parts
Mass
Approx. 0.9 k
g
Mass
Including pedestal
Approx. 1.0 k
g
* Using supplied AC adaptor
≥
Product Identification Marking is located on the bottom of
the main unit and AC adaptor respectively.
The following limits are in place regarding the
usage of this unit. You must be aware of these
limits before using this unit.
Panasonic will in no way be responsible for any
incidental damage which may arise due to a
failure to obey these limits, or to any condition of
use or disuse of this unit.
≥
Data transmitted and received over radio
waves may be intercepted and monitored.
≥
This unit contains delicate electronic
components.
Please use this unit in the manner in which it
was intended and follow the following points:
– Do not expose this unit to high temperatures
or direct sunlight.
– Do not bend, or subject this unit to strong
impacts.
– Keep this unit away from moisture.
– Do not disassemble or alter this unit in any
way.
Declaration of Conformity (DoC)
Hereby, “
Panasonic Corporation
” declares that this product
is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
Customers can download a copy of the original DoC to our
R&TTE products from our DoC server:
http://www.doc.panasonic.de
Contact in the EU: Panasonic Services Europe, a Division of
Panasonic Marketing Europe GmbH,
Panasonic Testing Centre, Winsbergring 15, 22525
Hamburg, Germany
This product is intended to be used in the following
countries.
Austria, Belgium, Bulgaria, Cyprus, Czech Republic,
Denmark, Finland, France, Germany, Greece, Hungary,
Ireland, Italy, Iceland, Liechtenstein, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
Slovenia, Spain, Sweden, United Kingdom, Switzerland
This product is intended for general consumer. (Category 3)
The WLAN feature of this product shall exclusively be used
inside buildings.
This product on purpose to connect to access point of
2.4 GHz WLAN.
(12)
DMP-BBT01EG-VQT3W11_mst.book 12 ページ ２０１２年４月５日 木曜日 午後５時２７分
