S-1
S1. About Indication of The Schematic Diagram ............................ S-1
S1.1. Important Safety Notice......................................................... S-1
S2. Voltage and Waveform Chart ................................................... S-2
S2.1. Digital P.C.B. ......................................................................... S-2
S3. Block Diagram .......................................................................... S-3
S3.1. Digital P.C.B. Regulator Block Diagram ................................ S-3
S3.2. Digital Block Diagram ............................................................ S-4
S3.3. IC Pin Terminal Chart ............................................................ S-5
S3.3.1. IC Pin Terminal Chart (1) .................................................... S-5
S3.3.2. IC Pin Terminal Chart (2) .................................................... S-6
S4. Schematic Diagram .................................................................. S-8
S4.1. Interconnection Diagram ....................................................... S-8
S4.2. Digital_Net (DN) Schematic Diagram.................................. S-12
S4.3. DAC_HDMI (DH) Schematic Diagram ................................ S-16
S4.4. Audio_IO (AI) Schematic Diagram ...................................... S-20
S4.5. PEAKS_PRO2 (PK) Schematic Diagram ............................ S-24
S4.6. PRO2_PERI (PE) Schematic Diagram ............................... S-28
S4.7. PRO2_EXBUS (EX) Schematic Diagram............................ S-32
S4.8. DDR2_CH0 (D0) Schematic Diagram ................................. S-36
S4.9. DDR2_CH1_16 (D1) Schematic Diagram ........................... S-40
S4.10. PRO2_ETHER2 (ET) Schematic Diagram ........................ S-44
S5. Print Circuit Board .................................................................. S-48
S5.1. Digital P.C.B. ....................................................................... S-48
S5.1.1. Digital P.C.B. (Component Side) ...................................... S-48
S5.1.2. Digital P.C.B. (Foil Side) ................................................... S-52
S5.1.3. Digital P.C.B. Address Information ................................... S-56
S6. Abbreviation ........................................................................... S-59
S7. Replacement Parts List .......................................................... S-63
Vol. 2
(K)...........Black Type
Colour
Model No.
DMP-BD30PP
DMP-BD30PL
Blu-ray Disc Player
Table of contents
Service Manual
DSD0711018CE
Diagrams and Replacement
Parts List
Name of Signal
OFTR
FEP
Circuit name being connected.
This signal is connected
to the FEP schematic diagram.
6.Use the parts number indicated on the Replacement Parts List .
7.Indication on Schematic diagrams:
5.The voltage being indicated here may be include observational-error (deviation) due to
internal-resistance and/or reactance of equipment. Therefore, handle the value
indicated on here as reference.
4.Although the voltage and waveform available on here is measured with standard frame,
it may be differ from actual measurement due to modification of circuit and so on.
3.The voltage being indicated on the schematic diagram is measured in
"Standard-Playback" mode when there is no specify mode is mentioned.
2.It is only the "Test Round" and no terminal (Pin) is available on the P.C.B.
when the TP (Test Point) indicated as " " mark.
1.Although reference number of the parts is indicated on the P.C.B. drawing and/or
schematic diagrams, it is NOT mounted on the P.C.B. when it is displayed with "$" mark.
COMPONENTS IDENTIFIED WITH THE MARK
HAVE THE SPECIAL CHARACTERISTICS
FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE.
S1. About Indication of The Schematic Diagram
S1.1. Important Safety Notice
Summary of Contents for DMP-BD30PL
Page 5: ...5 3 Specifications ...
Page 22: ...S 7 ...