7
4.1.2.
Special Modes Setting
UNSUP-
PORT
Unsupported disc error
*An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
This disc is
incompatible.
Display for 5 seconds.
NO READ Disc read error
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
Cannot read.
Please check the
disc.
HARD
ERR
Drive error
The drive detected a hard error.
DVD drive
error.
Display for 5 seconds.
IR ERR
IR communication error
[IR ERR] is displayed when communication
between Timer microprocessor and IR micro-
processor fails.
No display
SELF
CHECK
Restoration operation
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears automati-
cally. If a display does not disappear, there is
the possibility that defective Digital P.C.B. /
DVD drive.
No display
PLEASE
WAIT
Unit is in termination process
Unit is in termination process now.
BYE
is displayed and power will be turned off.
No display
UNFOR-
MAT
Unformatted disc error
You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment.
The disc is not
formatted properly.
No PLAY
When there is a viewing restric-
tion on a BD-Video or DVD-
Video.
Rating password is set.
No display
Item
FL display
Key operation
Mode name
Description
Front Key
TEST Mode
*All the main unit's parameters are
initialized.
Press [STOP], [SKIP FWD] and
[OPEN/CLOSE] keys simulta-
neously for five seconds when
power is off.
Rating password
The audiovisual level setting password is ini-
tialized to
Level 8
.
Open the tray, and press [SKIP
REV] and [PLAY] simultaneously for
5 seconds.
Service Mode
Setting every kind of modes for servicing.
*Details are described in
4.1.3. Service Mode
at a glance
.
When the power is off, press [SKIP
FWD], [OPEN/CLOSE] and
[PAUSE] keys simultaneously for 5
seconds.
BD-ROM history cleaning < Persistent Storage> of BD-ROM standard is
cleaned.
Screen display: [The player's history data has
been cleared] is displayed for five seconds.
Same display as before execution.
When disc is not in tray. press
[STOP] and [POWER] keys simulta-
neously for 5 seconds.
Forced disc eject
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
The display before execution
leaves.
When the power is off, press [SKIP
FWD] and [PAUSE] keys simulta-
neously for 5 seconds.
Error Code
Diagnosis contents
Description
Monitor Display
Automatic FL display
Summary of Contents for DMP-BD30PL
Page 5: ...5 3 Specifications ...
Page 22: ...S 7 ...
