Panasonic DMP-BD45, Operating Instructions Manual

12

VQT2H86

STEP 5 : Setting

After connecting your new player for the 1st time and pressing 
the power button, a screen for the basic settings will appear.

Preparation

Turn on the television and select the appropriate video 
input on the television.

1

Press [

Í

POWER].

Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA) 
supporting HDAVI Control 2 or later via an HDMI cable, 
then the setting information on the TV is acquired by this 
TV.

2

Follow the on-screen instructions and 
make the settings with [

3

,

4

] and press 

[OK].

[BD65]

[BD655]

 : After completing “Easy Setting”, you can 

perform “Network Easy Setting”.

≥

You can perform this setup anytime by selecting “Easy Setting” in the 
Setup menu. (

>

28)

After completing “Easy Setting”, you can continuously perform 
“Network Easy Setting”.

1

Select “Wired” or “Wireless” and press 
[OK].

If “Wireless LAN Adaptor is not connected.” is displayed, 
check that the Wireless LAN Adaptor is fully inserted. 
Alternatively, disconnect and reconnect it. If there is still no 
change in the display, consult your dealer.

2

Follow the on-screen instructions and 
make the settings with [

3

,

4

,

2

,

1

] and 

press [OK].

For wireless LAN connection:

If you are using a Wireless router (Access point) that supports 
WPS, you can easily perform the settings by selecting “WPS 
(PUSH button method)”. 
Otherwise, perform the settings by selecting “Search for 
access point” or “Manual setting” in “Other methods”.

≥

WPS (Wi-Fi Protected Setup) is a function that facilitates 
settings relating to the connection and security of wireless 
LAN devices. To see whether your Wireless router (Access 
point) supports WPS, check the Wireless router operating 
instructions.

Easy Setting

Network Easy Setting 

[BD65]

[BD655]

OK

RETURN

Network Easy Setting (Connection Check)

Wired

Wireless

A settings check for home network and Internet connections

is now being conducted.

Please select a connection mode first.

  Current setting 

:  Wired

 LAN cable connection:

 Connect a LAN cable to the unit and select “Wired.”

Wireless LAN connection:

 Insert a compatible Wireless LAN Adaptor to USB port 
 and select “Wireless.”

 Access point is necessary for Wireless LAN connection.

OK

RETURN

Access Point Connection Setting

Select a connection method to use with an access point 
of Wireless LAN.
Please refer to the operating instructions of the access
point about connection methods.

WPS (PUSH button method)

Other methods

p

WPS (PIN code method)

Search for access point

Manual setting

VQT2H86~Body_eng.fm  12 ページ  ２０１０年１月１８日　月曜日　午前１０時１９分