34
VQT2H76
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of items.
Press [FUNCTION MENU]
>
select “Other Functions”
>
“[OK]”
>
select “Setup”
>
“[OK]”
>
“Audio”
>
Set each item
For details of the each item, refer to page 27.
Recommended audio output setting
Example of connected equipment
TV via HDMI
*1
Receiver with
HD
audio
*2
decoder via
HDMI
Receiver without
HD
audio
*2
decoder via
HDMI
Receiver via
COAXIAL or
OPTICAL
Receiver
via analog output
*3
Setup menu
“Digital
Audio
Output”
“Dolby D/Dolby
D +/Dolby
TrueHD”
“PCM”
“Bitstream”
“PCM”
“PCM”
No effect
“DTS/DTS-HD”
“PCM”
“Bitstream”
“PCM”
“PCM”
No effect
“BD-Video
Secondary
Audio”
“Off”
“Off”
“Off”
“Off”
“Off”
“PCM Down Conversion”
No effect
No effect
No effect
“Off”
*4
No effect
“Downmix”
“Stereo”
No effect
No effect
“Stereo”
*5
No effect
“High Clarity Sound”
“Enable”
“Disable”
*6
“Disable”
*6
“Disable”
*6
“Disable”
*6
≥
Because underlined items are the factory presets, it is not necessary to change these settings.
*1
If connected to TV via except HDMI, these settings have no effect.
*2
HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
*3
Set “Analog Audio Output” to “7.1ch” or “2ch (Downmix) + 5.1ch”. (Press [FUNCTION MENU]
>
“Other Functions”
>
“Setup”)
*4
If the connected equipment that does not support 96 kHz, set to “On”.
*5
If the connected equipment that supports the virtual surround function, set to “Surround encoded”.
*6
When connected to TV via HDMI terminal for outputting image, set to “Enable”.
DMP-BD85VQT2H76_eng.book 34 ページ ２００９年１２月３日 木曜日 午後４時５７分
